I‘m still not sure. They were ok whenever I dealt with them but they didn’t seem as knowledgeable as the OG and depending on who had customer service duty their English was sometimes a bit let’s call it creative.
1 Like
Looking for a medium length bracket from IDEA boards. Having trouble justifying paying the price of the bracket to ship it to me.
Anyone have one or something similar laying around?
1 Like
Does anybody have a crimped 4pin JST NSH 1.0 connector or the stuff to crimp one? It doesn’t seem like I can find the locking version without waiting forever for shipping.
This is the connector, it’s used to connect CAN between my metr and vesc.
1 Like
Aw hells yeah. Dyk if its medium or long?
It’s the long version
Damn too long i need a shorter one thanks for the offer though
1 Like
I have some
I have a JST YRS-241 crimper, but I don’t have that particular connector nor pins in stock. If you want to send me a Digi-Key with all the things I would be happy to crimp some for you.
But make sure that the above crimper is the correct one. I got it for the PHR series
2 Likes
I deeply appreciate your offer, but I think I was wrong about which connector. It was, Looking at the voyage systems shop and the new Minnie, the connectors look the same as the metr and here:
They say it’s JST GH.
1.25 thread pitch could’ve definitely been me measuring wrong, I already have some JST GH pins, I’ll see if they fit in the existing shell I have.
Thank you though!
1 Like
Does anyone have a BT module they wanna send my way? or anything that can act as a link to vesctool without a PC being involved.
Probably not what you’re looking for… but I have a couple of old-tech HM10 bluetooth modules lying around. IIRC, they only work with super old FW (like 3.xx, not 4 or 5 or 6) and may also be limited to vesc hardware v4 (not v6). Might be making up that part 
Also I recall a limitation of not being able to flash FW thru these HM10’s.
Anyway you probably are seeking a NRF based BT module with support for modern HW and FW. Hopefully somone has a spare available for ya!
2 Likes
I have one for a Focbox Tenka Not sure if that would work but its just been sitting since I blew the controller
1 Like
I’ve rewired a Xenigotchi and metr.unity to regular UART, it wont be too hard to adapt.
I fried my xenigotchi by shorting it to the battery while plugging it in my accident 
.
Let’s take this to DM
1 Like
Looking for Belts in the Eu 245-5HD size just wondering where to buy sets at a reasonable price as 25 bucks for two belts seems overpriced to me
I know I know but have you maybe tried AliExpress?
1 Like
Looking for a single twerkboards 6355 190kv or any brand for that matter.
1 Like
Hey guys, would anybody happen to have 6384 motors, a dv6, or a metr for sale? I’m making a new mtb build. Thanks!
Since my helmet is broken instead of my head I have a silver mirrored and a clear visor left over for a TSG pass.
They are used but in good nick.
Giving them away, you just pay shipping.
Located in Germany.
3 Likes
Anybody have a Hummie DS enclosure?