Still need 295mm belts, I can trade you for other sizes
Anybody buy a big pack of cable glands and have extras left over?
Shipping the smallest package to you wouldnāt be much cheaper than a big bag from amazon.
https://www.amazon.com/gp/product/B07RHJM435/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
1 Like
I have a handful left, what size and how many?
Thatās a good point.
Just enough for one dual drive esc box.
6 phase. Think my TB motors are 12g maybe 10. I need to go look.
Iāll probably just use a xt90 for the power and epoxy it in.
$5 F&F shipped sound fair? Just pop your address in the PayPal note section
Works with 5.5mm bullets and 10awg wire
1 Like
I have 2x 395ās
These are sold
1 Like
Nobody has 295mm belts? I really donāt wanna spend $15 for a single belt
Do these fit the bill? $18ish for two without shipping or tax
2 Likes
Ya that would work
1 Like
Put them aside for me. I donāt even have $5 atm lol.
Forgot to cancel my netflix subscription and they overdrafted my damn accountā¦
3 Likes
They only work with 10 gauge, 12 might be a little loose unless you add some bulk to the wire
1 Like
8.99 turn into $60 because they ran it twice and our bank is apparently a dick
Overdraft fees must be the work of Satan himself, that shit is just evil
Good to know. Iāll probably use these for the power wires from battery box to esc box.
I think I found a different solution for phase wires.
Do you want the print for a MR60 / GX15 socket and the connectors? I was going to use them for my integrated deck but I decided against them last minute
Pm me a link. Iāve got a printer.
*oh cool.
It is for a sloped surface, otherwise your connector will be angled, the MR60 just mate inside so both sides are easy to remove, the GX port should have a permanent adapter