Wanted items cheap or free

Esk8 Parts Market Wanted Cheap or Free
, ,
#2520

Sure, thank you very much!

#2521

Thank you.

1 Like
#2522

I have some unused TB 50° baseplates that came with the TB218 if you want them, should be the same dimensions as the caliber ones

1 Like
Cracked wowgo 2S deck... Is it still saveable?
#2523

Hi everybody, these are some small things I need, but don’t want to buy a 25ft roll of and just trying to save money, since its not easy for teenagers to make a lot of money. If you have any extras of these parts, I’d be very grateful if you could share some. Thanks

  1. Braided sleeving
  2. Anti-spark XT90
  3. 12 AWG wire for the loop key
  4. 1.25" hardware
#2524

@b264 I have a sensation that you were selling these on the cheap. Couldn’t find the post to link

#2525

All the loopkeys I had for sale are gone

I have charge port fuses for US folks

And I have some 12AWG wire but shipping is tough. I could try it with a stamp… but you’d need more for an esk8 than just the loopkey anyway, so just get that from bezos

1 Like
#2526

I have some of that stuff, do you care if it’s a reverse loopkey?

#2527

Okay, I looked at the stuff from bezos already and that was gonna be by alternative if I couldn’t pick up any pieces here

#2528

If you don’t mind me asking, what is a reverse loopkey?

1 Like
#2529

I’d imagine a loopkey with male and female connectors reversed compared to general mass
@ZachTetra correct me if I’m wrong but that would mean your “key” is the outer shell with prongs?
So you’d have the xt90s sticking out of the enclosure?

1 Like
#2530

Female XT90s is board side instead of loop side

2 Likes
#2531

Not your greatest creation :joy:
One bad startup and you have to open the board to change it :man_facepalming:

#2532

I don’t recommend that for several reasons

It will turn the board on and off though

#2533

I just went the lazy route for sourcing my materials

Screenshot_20200719-223246
Screenshot_20200719-2232461080×2340 304 KB

1 Like
#2534

@Flasher @b264 it ain’t mine lol, it came with the MTB I bought a while back…that thing has a plethora of issues

  • loop key is backwards
  • both enclosures were just held with weak Velcro
  • hangars were backwards (matrix II)
  • ESC wires were AWFUL
  • sensors were in the UART port
  • binding hardware was upside down (the screws)
  • shock blocks were loose
  • motor mounts were bent
  • esc enclosure was a fucking a 10 cent plastic box

The list goes on

1 Like
#2535

Many unrecommended things can. I’d go for a nickel with tape

1 Like
#2536

Haha I penny pinch those parts if I can because I have bought $400 at least of battery and electrical supplies

1 Like
#2537

Is that board up for grabs? I’m still looking for a donation to start my second build :joy:

1 Like
#2538

Haha hell naw…she’s getting some TLC on my bedroom floor as we speak :joy:

(New esc enclosure)

2 Likes
#2539

I’ve got a wife for that

2 Likes