I’m looking for meepo back truck.
1 Like
Looking for raptor hubs outwheels. May be used
Hey guys I’m looking for firefly remote. Just wondering if its possible if anyone have made a spare firefly remote as I’m not so good with fixing the electronics on the remote and wondering if anyone sells it hahaha
2 Likes
long shot but i really need 4 bolts, m6x25, preferably 10.9 steel or titanium, A4 stainless could also work. they need to be countersunk, either torx or hex
cheers 
Edit
Philips head also works 
1 Like
Hey!
I am looking for a set of rough stuff/cloudwheels/foamies like wheels with hub pulleys to go with them.
So realised the heat shrink I ordered is to small
Looking for some in the U.K. to cover a piece of battery
It’s around 15cm wide 20cm long and 5cm thick
Anyone got anything cheap
3 Likes
lol so I did a silly and forgot I loosened my motor and went for a ride, instasnap as soon as I punched it
need a 265 15mm belt, will take a matching pair
4 Likes
Anyone got a XLR female connector?
anyone have a 12s 30A or more BMS for sale?
or any advice which Ebay, Aliexpress, 7-11 ones are any good (my eyes are done internetin!)
Anyone has motor pignons/gears with a 10mm bore for moon LRV gear drive. Not the 3GD, please I have it all set up.
3 Likes
If you every get any info lmk… looking for a 12s bms charge only lol
VVV
1 Like
They haven’t arrived yet I believe^
2 Likes
https://www.litechpower.com/ is your friend
They sell Bestech BMS and you can trust those
make sure the balance current is not blank
(like this one, for example. don’t get that one)
some models don’t have cell balancing and are current protection only
3 Likes
Try this one for up to 5A charging
https://www.litechpower.com/product-detail/HCX-D127V2LI12S15A.html
and using this circuit
also 15A for the accessories (lights) circuit, if you want to put that there (is not necessary)
1 Like
@b264 what about this…
https://www.litechpower.com/product-detail/HCX-D140LI12S15A_05.html#
I am stumped with its wiring though
Yes, the D140 also works, except charging up to 15A and no accessories circuit, so you would use this diagram