Nah the OD of my inner race is 16mm.
Never tried them but it might cause issues having an oversized washer?
Nah the OD of my inner race is 16mm.
Never tried them but it might cause issues having an oversized washer?
Ok Boomer… small shim 2 account 4 small pp…
https://www.gobilda.com/2807-series-stainless-steel-shim-12mm-id-x-15mm-od-1mm-thickness-12-pack/
problem solved lol
Still looking for a TB 218mm compatible Motor mount in the EU.
Dickyho mounts here.
I saw those. Not a big fan of grub screws. thanks though
I’ve had 3 lots of Dickho mounts and never have they let me down.
I know, not saying that they are bad. I just don’t really like things mounted with grub screws
But i may have to go this route if i can’t find anything else.
Take the grub screws out and drive a machine screw into the hangar, I think they are m4
If you wanna make it hella secure then tap the hole (thread through the clamp first) while the flanges are tight and red thread lock a 12.8 bolt in…that will last as long as the hangar
I intend to do that some time soon for the Paris trucks under my care
Update : Need the above +
12s bms (d140 charge only for example)
and 12s charger (4A)
If you want to make it hella secure than put JB Weld all over it and then attach it with the grubscrew, then wait 1 week before riding with it
Won’t ever move. Ever. Is now part of the hanger
Willing to pay obviously but does anyone have 1.25 surfrodz kingpins?
Does anyone have:
6x female 3.5mm bullet connectors
6x male 5.5mm bullet connectors
2ft of 12awg wire
I’d like to make motor wire adapters, willing to pay
Shipping would kill the deal, but I have 6 5.5mm bullets flying around, that I don’t need.
Not really, I think Ill stay within the us
I think I got them…many unity adapters for kellen has left me with many unmatched pairs and I just got a bunch of wires shipped in last week
Let me know
If Zach doesn’t, I have those