@worldismine772 have you seen Esk8 supply’s DD 58KV 3000W was like 3 types of adapters to use and all for £270 with hanger.
I’ve heard Boundmotor’s one is a bit underpowered from reviews.
@worldismine772 have you seen Esk8 supply’s DD 58KV 3000W was like 3 types of adapters to use and all for £270 with hanger.
I’ve heard Boundmotor’s one is a bit underpowered from reviews.
Shouldn’t the esk8supply DDs be the same as the ones from boundmotors? Should all be from onewow, am i wrong?
This would also be my suspicion. If they’re running off a budget ESC and 10s2-3p, that will also limit the performance.
what he says!
Esk8supply / boundmotor / onsra / elofty… etc pretty much all esk8 brand has dd offer have the same source
The DDs are sourced From Onewow. My version from July 2020 have 2000 km on them so far. Except for the TB110 kegel pullies issue, I find these my favorite ride for speed, range and smoothness.
Did you try loosening that wheel a bit?
No. Loosening it just accelerated the wear.
Many riders I know are using cloudwheels with the abec pulleys and they are problem free on these onewow DDs. I bought mine from here, since they are local, warranty service has been excellent.
those look the same as boundmotors and may be way safer due to the single axle approach, so you know the axle won’t just fall off
and they’re only $359 @ https://boundmotor.com/product/direct-drive-motor-kit/
edit: just purchased a set, lets see if the wheels fall off this one or fail on initial test ride like my TB DD’s
will letchukno
Where the heck can i get that finish on a HAYA Deck?
Are the wheel adapters for the XL version the same as the normal version?
Yeah, they are the same.
so i got some new ABEC adapters. For some reason on one side, it locks up the motor when i tighten the screws of the adapter even a slight bit. Any pointers?
@Edness - Could be tightness on the bearing. You can add m4 washers between the adapter + motor to get it to clear.
@torqueboards I seem to have something similar where one side of the DD feels like it is grinding against something and is very stiff. Like something is caught against the inside of the can? where as the other side moves more freely.
Wanted to get your advise before opening it up.
Careful, 3 sets here in France, 3 axles bend.
Thanks Dex, that worked.
Another question, both kingpin bolt “clicks” while going side to side. Anyway to stop that and have the kingpin stay in place?