The Undertow | 10S2P DIY Riptide R1 Throwback | Ft. Custom GB Lite v1 Remote

[A-damW]

Dude, super cool!
I’ve got one of those 1.69’“ ST7789 dev boards I got to make a Pubmote(for onewheels)

Ran into the same thing, got the dev board only to find ST7789 not supported(no time to write my own support)

I like George’s remote on the BLE stack better anyway, and now there’s hope I can use the dev board after all.

Technically, George gave permission with a Creative Commons Attribution-NonCommercial-NoDerivatives licence, but I wholeheartedly agree with getting an authors blessing.

I started a smol OSS project, so I appreciate the time anyone puts into something given freely.

My little project;

Making bms's VESC compatible

Alrighty folks, welcome to my first topic here on esk8.news!(Ya’ll are pretty awesome by the way!) The TL,DR; An open-source, intermediary ESP-32 Bluetooth/ESP-Now bridge between a jbd bms and a VESC Express, to transmit all the cell voltage data(and more) to a VESC controller. I’m going to be a little bit lazy right now, and just post a link to the Endless Sphere thread that I started last year; Feel free ask to questions, I will answer them as I am able. Edit, Github link;

Let me know if you need a tester

Cheers.