The Smörğasbord |trampa HS11|TB6|Kaly Drive|APS 6380 170kv| 12s5p QB26800

[mutantbass]

Trampa SPYDER - holypro, ultimate trucks, superstar hubs, urban treads,...

heres my build thread with inserts

couple more resources

Threaded Inserts: Which ones are best? And why?

Exact ones I use. Yeah m3 x 6mm. No other way to know except trying. I ended up using 10mm but depends if you use padding in between. Mine goes screw - spring washer - regular washer - enclosure - 1mm foam - insert Total of 24 screws. I used m3 as opposed to a larger size because I wanted to take out as little plastic as possible from the enclosure but who knows. probably doesn’t matter. Also I drilled m4 holes into the enclosure. You would have to be some kind of alignment wizard to b…

Threaded Inserts: Which ones are best? And why?

I do drill a full hole the length of the insert and use a drill bit collar to make sure I don’t drill all the way through the deck. Just put the insert right next to your bit and find the place where your collar needs to be. If i remember correctly, the trampa 15 ply is about 10mm thick. my insert is 6mm long. I drilled in about 7/8mm and it worked beautifully. Practice on a piece of wood first. I use loctite 648 btw. You can sort of see in this picture the point at which I apply the loctite. s…