The Clown Prince of Crime is Being Parted Out

[Briman]

I am parting out my board since there has been no interest as a whole or whole without the deck. I’ve been in Esk8 a good amount of time but it’s time to move on as I am doing more woodworking then skating these days. I don’t even know who is still active from from when I was active on here.

The board has maybe 50 miles on it. The wheels are not even skinned yet.

Figured since there are supply issues with everything right now someone who is just about done their build could use some parts. I would prefer to sell it in lots like the drive system or both vesc. Who knows maybe @J0ker wants the whole thing and not just the deck

I need the money to help pay off some house work from this past year (having a house is expensive and had to put in a french drain system) and equip my woodshop with nicer tools and lumber if anything is left. @Venom121212 knows what I’m talking about I remember his shop in his garage.

Below is a list of the parts on the board. If you want any other pictures just ask and I can take them tonight. I’m not up to date on the pricing so make me a far offer that is not an insult to the board.

Location: New Jersey

Deck: custom made by me with artwork done by me as well.

Whole Drive system $225 OBO
Trucks: Purple Caliber 2

Mounts: @Janux-esk8 dual motor mounts fitted to these cals

Wheels Pulleys: Made by @Janux-esk8 I believe they are 36T and 15mm wide

Motors: Racerstar 5065 sensored 200kv

Vesc: 2x Enertion Focbox running sensored FOC on Ackmaniacs firmware. Sold

Battery: 30Q 10s4p with Bestech charge only BMS with loop key for on off $300 OBO built by @Scepterr

Enclosure Sold for the New Alter Wedge. 405 is on the board but I also have a Brand New never mounted alter wedge both made by @Psychotiller

Remote: Enertion Nano-X remote. Sold

Peace, Love and good vibes

[BillGordon]

Sad to see this go. Always liked this board.

[Briman]

I’ve never been the same after my crash and it doesn’t get used like it should. I have surfrods that I would probably throw on there to make it a push board.

[slizer18]

Ikr, this board looks like so much fun to carve around on and have a chill ride with.

[Briman]

That is mostly what I did. I never pushed the board hard. Take a trip to NJ and try it out

[cfelzien]

120 for the focboxs?

[glyphiks]

Rules state you need prices. Rules be rules.

Guidelines: Used Parts for Sale 2022

Used Parts Only If you just sell used parts, please use the “Used Parts for Sale” category. If you sell multiple parts that are new and used, feel free to combine them inside one thread. In that case you can choose either one of the 2 Categories. Listing Must Contain Location of you or the item. Price in the currency you want to receive Price of listed Item/s. OBO can be added if you wish. At least one photo inside your Sales post is mandatory. You are trying to sell your stuff here, so pl…

[Briman]

Honestly I don’t know what these parts are worth used as I have never sold used parts before Cost would be USD

[b264]

Then just list them at one million dollars, and accept offers. That’s technically not against the rules.

Though you’ll probably sell more if you put reasonable prices on them

[Briman]

[glyphiks]

Not to be rude, but ignorance generally doesn’t fly as an excuse not to follow rules

[xsynatic]

@Briman

Honestly I don’t know what these parts are worth used as I have never sold used parts before Cost would be USD

Option 1: Take new price and deduct a few percent, add OBO, done.

Option 2: Price them for as much as you would personally buy them for, add OBO, done²

[tech.shit]

@Briman

I don’t know what these parts are worth

[Briman]

I have updated the OP with pricing

[Shadowfax]

@Briman

Battery: 30Q 10s4p with Bestech charge only BMS with loop key for on off $300 OBO built by @Scepterr

@Briman I saw that @scepterr sold some flex PCB built packs. Is this one of those / does it have some flex to it? or is it a solid brick pack?

[Briman]

Sorry for the late reply. It is solid. He offered it when I had him build this but I decided to make it a rigid pack so there would not be any worry of a solder joint getting fatigued.

I’m taking reasonable offers on parts. It is well past the time to see it go.

[Shadowfax]

A few questions… When was the battery built? How has it been stored - low/med/high charge? Does it still charge to 42v? Got any pics of the battery construction under the shrink wrap?

Thanks

[Briman]

I do not have any pictures of the battery under the shrink wrap. I did not build it @Scepterr from here built it. I could probably find pictures of the construction of it if you want to see them.

It is from 2018 it only has about 50 miles on it. Last time I charger it up and rode the board it charged up to 42V.

I ran it around to probably around 50-60 percent.

[BillGordon]

Scepterr knows his shit, so no doubt built well.

[Briman]

I was able to find some pictures on the old builder forum that were sent to me as the build was done.

Postive welds

Negative Welds

Silicone between the packs to dampen vibration

Final assembly

Hope this helps