4 Likes
And u think no one should charge from 1v despite what the data sheets say. Thatās fine. Iāll trust the data sheets of 4 of the major cell manufacturers and what batteryhookup say
Just let it lay then. The evidence is all available. Ur free to do what u want.
To be fair, iād trust the people who care about my safety over the people selling me the products.
But @Common_good is right, this is a dead horse. Lets all just move on
2 Likes
This is my take on the 1v thing.
If your vape needs a cell really bad go for the 1V thing buddy
You canāt state if u think itās possible?
Are the data sheets all wrong?
Is it the glue the manufactures are sniffing?
Remember when u all raged!! Oo the danger. Must ban. The sanctity of the battery builder thread was under attack. Bunch of pathetic fucks think they know everything.
Thank you for your advice, I will use it when my vape dies.
Also the glue thing was from when you said you super glued the balance leads on a battery pack you built once. For the readers following along.
That potted A123 battery with glued balancers is going great still. The experiment was a success!! Not for u though.
Your experiment wasnāt a success for me ?
Iām confused
You want me to fail. Of course.
It is ironic. the forum and Iām being asked by someone who raged about how unsafe I am, about the most raged topic. Very ironic. Thatās not me insulting anyone. And itās definitely not me insulting anyone with ā¦ something that isnāt even an insult and u can charge from 1v.
Fail at what?
The battery w glued balancers.
Truth is I think I set it up too competitively. I saw the potential of them being charged from 1v. Batteryhookup tells and simply reading the data sheets. But I learned it here. I think u did too. All of u. And ur pissed because I was competitive about it.
But Iām done w it and will avoid the question when charging cells that are down to 1v come up again. Iāll leave you all to it. Iām curious how will go but to me ā¦ Iām interested in the reality of just how things do go with cells that get down that low. Iām thinking @Battery_Mooch should do cycling of 1v.
No more coy lil quips like
?
I have de soldered the connection before, but even though I almost never need to i now use bullets of various sizes (usually mismatched to prevent accidental improper connection) to connect the bms to the battery. I donāt know if it will work here to clear the alarm either so definitely try the easy way first
1 Like
I just explained the irony above for u:
You still think too unsafe to charge from 1v? You as well. Another safety patroller who was wrong. Or are the data sheets wrong?
1 Like
Did you ever hear back from the different manufacturers or about the different models to confirm that the unrelated spec sheet that did mention charging from +1v was applicable? If not then this is just another reckless recommendation based on cherry picking anecdotal data points while ignoring genuine questions and instead focusing on rage bate and pushing the victim narrative.
Doing something dangerous is perfectly acceptable, doing it for others is not. Telling others that it isnāt dangerous when you have no evidence or proof is borderline malicious.
You made a claim, people asked for evidence, the evidence was judged insufficient, now youāre acting like a whiny baby and spouting off instead of actually trying to find or get support for your opinion and claims.
I keep my finger on this thread to try and help others learn and understand how to make this inherently dangerous hobby a little more reliable and reduce the risks, while also trying to learn more about the process and effective methods of making and designing and maintaining battery packs in relation to esk8 and pevs in generalā¦ and half the time i look here itās just you making some claim and not supporting it with adequate evidence and being butt hurt about it. Take it to derail ffs, or make a sincere separate topic to discuss it there
2 Likes
We already did this.
Many are power cells. No need to call the manu and they tell you in the data sheets. The data sheets ARE evidence. They obviously are what the manufacturer says you can do
4 Likes
Stop being a troll and start a wiki of cells and their minimal safe recovery voltages, you could be doing something productive with all this angst but here is just another example of you raging when you could be doing something helpful. Stop wasting your energy, you are obviously passionate about it - do something useful
1 Like