rosco
January 29, 2021, 12:09am
#12681
I don’t believe you are asking this now after just trying to sell the battery you made.
If I were you I’d be wearing safety goggles and stuff when you’re working on batteries.
And not in the house.
(Full disclosure - like I did when I made my first esk8 (while drinking) and blew up a lipo in my garage - burning lipo bits flying everywhere )
Take it easy. Safety first.
10 Likes
Halbj613
January 29, 2021, 12:13am
#12682
no the question wasnt so much can you. as i knew that nobody does. was more just thinking the reason why?
Maybe he didn’t get that far lmao
1 Like
rosco
January 29, 2021, 12:16am
#12684
Because it measures voltage across each p group.
For it to do that it needs to connect to the ends of each group. To measure across that group.
Those connections need to be in order so it is only trying to measure across one group each time.
You can easily check this with your meter after it’s wired up by measuring between each pin on the plug (before plugging it into bms)
1 Like
Halbj613
January 29, 2021, 12:18am
#12685
yeah thanks
that was all and thank you
1 Like
Ok, so I’m a little confused about something.
I am talking with a potential customer about battery options for his build. I suggested these Model 3 cells as potential cost-saving option compared to the P42A (he wants a 12s12p, so the amp discharge capabilities are not as much of an issue). He asked a very good question, and I am not sure I remember seeing it asked or answered in this thread.
“How do we know these are legit?”
Uhhhh…? I dont know.
The story that we all heard when they hit the …
Where did these mystery cells come from? Find out on this episode of “Inspector Duck and Constable Google’s Wild and Wacky Adventures Into Conspiracy Theories!”
3 Likes
A13XR3
January 29, 2021, 4:49am
#12687
iirc it was the dots at the bottom from tesla’s laser welding process process to attach the cell level fuses to them
1 Like
JoeyZ5
January 29, 2021, 5:03am
#12688
Anyone know where to get a 15s non-smart BMS? I might be able to contact DALY. Does shorting the last two pins on a 16s DALY work like it does on a smart BMS to make 15s?
1 Like
I will be stocking some non-standard voltage Daly BMS’s soon
If you havent already, check out this poll on my vendor thread to let me know what voltage you would like me to stock!
1 Like
Halbj613
January 29, 2021, 10:18am
#12690
so i finished re assembling my pack and it fits enclosure fine
measured 42.6v which seems fine but then i opened the bms app and got this
what could cause it? and is this pack screwed?
Sebas
January 29, 2021, 10:20am
#12691
Are you sure you wired it correctly? Does it show the same voltages when you measure it with your multi meter?
1 Like
Halbj613
January 29, 2021, 10:21am
#12692
so im trying to get to them now
would one be main negative?
Sebas
January 29, 2021, 10:21am
#12693
I think you mean b-? Show us a pic of how you wired it
1 Like
Simeon
January 29, 2021, 10:21am
#12694
Did you connect the main battery - to the BMS? (Not the balance leads one, but the b- )
2 Likes
Halbj613
January 29, 2021, 10:21am
#12695
no i have connected c- yet do i have to?
thought it should read normal values for the moment still?
Sebas
January 29, 2021, 10:23am
#12696
Dont need to have the c- connected for reading the correct cell voltages
Simeon
January 29, 2021, 10:24am
#12698
Did you do this connection?
3 Likes
Sebas
January 29, 2021, 10:24am
#12699
Should jump up 3.5v every step
Halbj613
January 29, 2021, 10:26am
#12700
ah no sorry havent wired b- yet
will do so now and come back
also will measure on the bms thank you