@Linny Shoot me a Message. Need hanger width, bushing duro and ill knock a set out for you.
Heya, any idea when the 3 links will be back in stock?
Are you going to make any with the OG hanger anymore or only the HD? I’m trying to pick up a set before esk8con
@ShutterShock
OG hangers are in stock. HD 3-links are in stock.
I can assemble an OG hanger set, shoot me a message and ill set it up.
Okay sweet. I’ll shoot you a message today
If you dont mind me asking, what are the options you offer for 3 links relevant to an esk8 setup, just the track pack and HD 15.5? What does the HD change vs an OG hanger? Sorry if its a lot of questions, I’ve been interested for awhile haha.
Answers in the video
Any possibility of selling a longer motor mount, or producing a motor mount clamp with threaded holes to allow for people to design their own mounts? I’m wanting to run a motor mount out the back, instead of tucked under and the stock length would probably have motors interfering with those tie rods.
You can easily run motors out the back, especially on the rear as the radius rods are at a low angle. Ive done two setups with 3-links, both with motors running out the back.
My current board: (will be 4wd soon)
Previous board:
How much clearance did you have from motor can to radius arm, and what angle of radius arm is that at? Im potentially running 7490 size motors, so a fair bit thicker than most.
Radius rods connected to middle position of baseplate. Motor clearance to radius rods pretty much whatever u make it. The mounts can be rotated to whatever position u want. Depending on tyre size, u should be fine. If going 150mm or smaller u may have issues with ground clearance (if using larger motors).
Hello, I ordered the wheel widening kit but it doesn’t fit in the wheel hub at all.
Even if do so, there is no room for the bolt in holes like photos.
Let me know how to do.
My order number is #1373.
I can’t upload photos. If you wanna see, leave the email and I’ll send them.
It sounds like you may have incompatible hubs, fivestar and the new rockstar pros are quite different when compared to the original rockstar II, or trampa hubs for example
What wheels are you trying to put the spacers on?
Added to the webstore:
Super Spine Single is a 15kw single motor dual drive wood and chromoly hybrid we have been working on.
We have been beating the living crap outta this setup without issue. If you have interest in this please feel free to contact direct for inquiry.
Will be offered as
Bare Chassis
Rolling Chassis
Complete
Does this mean I was correct in saying that “ I wouldn’t be surprised if the next generation of Stooge Race Boards followed more of my ideas and came out with W concave and a single motor duel wheel drive. ”
Looks like these will be shipped with the new Hobbywing ESC?
The Hobby Wing esc is proving it self easy, robust and very reliable. Run temps stay cool on hot days with hours of track run time. 300a sustained 2000a spike.
Has basic data logging and bluetooth programming.
Inspired by the W red-embers put in the 44 I had design input in along with @Psychotiller, Matt Carol and Jamie.
Still a great deck and very relevant
Short rod work loooong time ago.
Short hangers,
Narrow setup single.
Definitely inspired by somthing.
Sure did appreciate the work you did on my baseplate, thank you @JaysTCB
I dont appreciate the interweb trolling or the murder of v-5 #011.
That part kinda sucks
Drama drama drama.
Final decision: I give 100 points to @MoeStooge Moe for the design of v6 proto. @JaysTCB I award you no points.