Added the proper holes using the spacing from the matrix ii model I had and verified with my dagega spacer. Very confident with holes. This is what I meant by 3 parts. Will remove empty space in between to decrease print area. Or may fill with extra stark industries stickers so I can stick them onto things
.
The middle sticker will be the hardest to put on because there are no guides on the deck. Though, since I am cutting out the middle of it I can use that point to align with the centre of the deck - added this thing in the middle as a guide.
Waited so many months for matrix iis finally!
I wanted 9inch tires but they’re sold out. Definitely not enough clearance without risers. I ordered these yellow 8s then they called me and said there are only 3 left but they have a 4th, the display one. literally got the last available one 3 came in mbs packaging, the 4th was in a Ziploc and the shade of yellow is perfect for iron man! It was meant to be
About to spend another $100 just on spray paints, primer, top coat when will my wallet have peace
Also I got rid of the yellow part on the stark logo. Replaced with dark red. Even though that yellow matches with tires and also matches with a spray paint I found. Since I’ll be putting sperate sprayed griptape ontop I’m going to match with the real gold colour for iron man. I’ve put in too much time not to make it accurate, gold > yellow.
Spent 2 hours applying these stickers perfectly. Been very meticulous with everything. Still waiting on my nickel but apparently it’s in my country for the last 2 weeks. Should have been here a month ago! I could be close to done my build now if my nickel arrived then
I disassembled them. Put them back for the pic. I used adhesion promoter and clear topcoat. I expect the tires to do exactly that. Just hope it won’t be too much and quickly. Though at least the bottom colour is yellow. My hope is the trucks and rims hold up.
3 came in mbs packaging, the 4th was in a Ziploc 
and the shade of yellow is perfect for iron man! It was meant to be 
