Sorry, sold the remote a few weeks ago
Both pulley sets/retainers
For anyone who was following this waiting for the part out, I’ve disassembled the 4WD and have begun to sell it off in separate posts. I’ve already sold the pulleys, wheels, and the remote. Here are the links to the other postings and I will make a couple more as I get the parts photographed.
Ronin Truck, Mount, & Dual 6355 Motor Assembly
Description: I pulled these Ronins with dual TB 6355 motors off my 4WD build. Marcmt88 of Janux actually made the mounts for me on these exact trucks, in his shop, so I’d like to sell them assembled. It may be hard to get them to fit on other Cronin specimens as well as they do on these. Has Torqueboard 6355 190Kv motors (sensor cables ends cut, but can be spliced back if for some reason needed*). 15t pulley and dual idlers. I’m selling these …
ESCape
Description:
2 ESCapes for sale. Good condition. Has velcro on the back. Bullet connectors. Really low miles actually. Pulled these from my 4WD build from a few years back that didn’t get much use.
Price (USD): $175 each + shipping
[IMG_6097]
[IMG_6100]
[IMG_6099]
Ollin Vesc 4.12
Description: Motor controllers from the 1st golden age of diy esk8 by Ollin. These have heatsinks on them and made of great components. Velcro on back. Couple of the caps look dented from where I s…
1 Like
Here’s the last of the part out:
Selling used Landyachtz Evo 40 with quick disconnect racing hood pins and enclosure. Board has velcro on the bottom for component mounting. Has some hardware and riser pads. Board was painted black prior to velcro.
Rough routed channels for wiring tip and tail of the board, could use cleaning up or not really noticeable when wires are there. 3D printed wire retainers. There is a light up graphic of a bird, but that could be sanded off and painted or gripped over; even masked to a new logo o…
Cast Ronin Mounts with Torqueboards 6355 motors. I sold one set of these. Just got this pair left. If you don’t have Ronins you could probably do some filing and fit this to other trucks
$100obo.
[image]
[image]
1 Like
Sold all mounts and motors. LY Evo board and enclosure still available
how much for just the enclosure?
Let me know if you see anything else you could use.