Trying to put together a sort of budget build for my cousin, his ownboard battery is fried and deck isn’t the greatest shape. He wants a 12s4p p42a with a drop through/down deck. This skate shred deck looks promising:
Anybody successfully put an enclosure on there? Would love to get one from @eBoosted if something fits.
If anybody has a deck/enclosure combo they don’t need, he’s looking for that!
I have a skateshred deck it’s nice and big ! Enclosure is kinda janky with a fiberglass enclosure made by bigben, but the strong shape at the drop makes it necessary to have a lot of gasket, not the best looking in the end
I have a very similar deck. I put a segmented flexy fiberglass enclosure. Meant for a KALY type deck. It was designed for 10s5p. Turned out 1.5 inches too long for my deck. And so, instead of declaring defeat, I used 1 x 1 closed cell foam gasket. The enclosure does no bolt up tight. It floats. The rest of the enclosure has .250 gasket. It looks a mite flukey, but works well and looks pretty good. I think, unless you go double stack, might have to go 10s. Check my build thread.