Great thread @Venom121212
Please chime in would really love your input @Lee_Wright @ducktaperules @Andy87
3 Likes
No details? No links? Come on now
1 Like
3 Likes
Put it in the thread lol
Who knows when that site will even work
3 Likes
My kitchen oven. Set Oven temperature to about 350 degree then slowly increase to bake 360 ,370, and finally to 375. have visual of the kydex and when you see the kydex chance from wavely to smoother reflexed slag then you are done. Kydex on my inferred gun was about 374 degree when I take it out of the oven. I also line the lowest rack with aluminum foil so the kydex is not being heated my the heat source. I did kydex size 12x 23inches and 0.08 thick
3 Likes
That’s dredful
4 Likes
that isn’t even the worst of it🤣 those boards are such garbage
3 Likes
What board is that if i may ask?
1 Like
Momentum boards
2 Likes
They are disposables
2 Likes
One time use esk8
4 Likes
Will those kally mounts mount to any truck or just his?
2 Likes
Can I see a photo of the inside of the box with your battery if you have one? I’m a fan of the junction boxes and am wanting to move to a similar battery size.
Oh yeah… Please?
3 Likes
Need a double stacked version for 12s12p…
4 Likes
They should fit the standard trampa truck. His is based off of that with some modifications. I can say that the tolerances on these parts are SUPER TIGHT. I ended up having to spread one a bit and lube it up just slightly to get it around the hangar, very well made!
@Kaly I know you aren’t on here much, but can you “shed some light” on your tactical mounts? Will they fit other trucks?
1 Like
Trying to see if I can get a 12s8p in my current box but it’s going to be tiiiiight butthole.
This is 50 cells, trying to get 96 
5 Likes
When did you get that fancy Hyperion battery? 
4 Likes