This is awesome 
Where do you keep the police radio scanner?
What bad guys have you fought?
Can I have a signed T-shirt?
6 Likes
To be honest, the cage is not ready, still needs the center adjuster which is currently in the works:
4 Likes
@Tampaesk8er on a scale from “polyurethane longboard slide wheels” to “pneumatic all-terrain wheels”, how do those wheels do when it comes to battery range?
3 Likes
I want to try 125mm Trampa Gummies sometime.
1 Like
I havn’t tested them that way yet, been very busy, not much riding, i’ll let you know when i do.
1 Like
Which BMS is that?
Looks like one of these generic waterproof China BMSs
2 Likes
Oh, fuck yaaa.
1 Like
Just wanted to see how it was made after I ruined the packs falling. 
1 Like
Ah the old sk3 wobbly can. Tip. Never run those things without first re doing all the loctite. Especially the front plate 3 philips heads.
Edit; the newer ones do indeed run allen bolts now. My early ones have philips.
3 Likes
You’ve just successfully guaranteed I will never try the sk3 motors. 
2 Likes
Once you put thready on them they last forever.
2 Likes
I didn’t know it was a known issue.
Any reason rethreading won’t work?
1 Like
I run those almost exclusively and never had an issue. I got into a habit of checking all bolts on anything manufactured in china though because QA…or lack thereof.
Its just those front 3 plate bolts that usually come loose so once thats sorted they are tanks. No reason why you can’t rethread though if being loose has done some damage.
2 Likes
Never had an issue… except wobbly can?
LoL.z this is too confusing 
1 Like
Once due to loctite or lack of it which I explained quite eloquently I thought.
Put your glasses on Brian.
For perspective I don’t consider checking and re doing thread lock on a motor an issue. Magnets falling off and bearings imploding yes.
I rarely wear my glasses. Only to drive an automobile or play cards.
1 Like
What happened to my motor?
1 Like
You probably fucked it due to incompetence. Joke.
What did happen to yours?
1 Like