I wouldn’t have any issue with a thread on that if you were using esk8 parts.
Or endless-sphere is another place for that, but I like this discourse forum platform better than the php platform powering ES.
I wouldn’t have any issue with a thread on that if you were using esk8 parts.
Or endless-sphere is another place for that, but I like this discourse forum platform better than the php platform powering ES.
Thanks guys, will do that tomorrow with some nice pictures, it’s a cheap way to electrify a bike if you have some parts laying around
@b264 I feel the same about the platform, looks really dated
@Skunk yeah, it’s made with being pedal assist, for now it’s just a button on the handle bars that turn the motor on or off, I did some simulations using the ebikes.ca trip simulator and it has potential for a ridiculously low consumption, like 3 Wh/km when you factor in regen
Take a look at Kepler threads, lots of good information
https://endless-sphere.com/forums/viewtopic.php?f=31&t=86961
https://endless-sphere.com/forums/viewtopic.php?f=28&t=84905
https://endless-sphere.com/forums/viewtopic.php?f=28&t=96581
A fail safe incase one fails
@Tampaesk8er looks like you’re gonna wanna find a different solution to keeping your phase wires from touching your motor =/
That was 2 yrs ago video 1st build, everything has been updated on that board to dual.
What are those tyres?
Tiller’s 6x3
Hey Dexter, it would make sense to have the TB DD and the TB AT in a bundle. Is there somethin’ in the future to come?
@Kellag beasty tires… lol
@Mainflow Yeah we’ll have an TB DD AT bundle for them soon. Just doing some testing first.
Hey, is that the Mark one board B thingy MTB deck?
Did you just print the extensions designed for the Trampa and stick them to the deck? Does it need any modifications?
It looks like kind of, right?
It’s a cheap Chinese deck, can’t say that it’s the mark one as I didn’t bought it from them, but I guess it’s the same company which did produce it.
Yes i just printed the trampa carver extension and epoxied then to the deck. It’s not a perfect fit, but for me it is ok. You could file a bit of the concave of the deck to make it fit better, but I didn’t.
Eskait lawnmower?
On a budget right now…so what else to do
Eskaite*
@KfromtheBay
Are you a casual Metallica fan or more of a hardcore fan? My wife recently bought a Metallica t-shirt from Fashion nova. I asked her to name one Metallica song and you would think I asked her the atomic mass
of carbon. Curious to know the thoughts of those hardcore fans,
Knowing Metallica is becoming fashionable.
Yeah I guess it’s the problem with being that good and also enjoying to get paid for all the hard work they’ve done over the years. I’d say I’m somewhere in the middle. I don’t really nerd out on Metallica like some folks do. But my first concert was when I was 13 years old and a friend had an extra ticket. That was my introduction and I have been a fan since. Have been on the rail at shows and have driven to Las Vegas and San Diego to see them.
My take is that of… I don’t really give a shit who likes them or who just wants to make a fashion statement. Similar to Thrasher hoodies for instance. Some skaters got totally turned off because “posers” wear them and now they avoid the brand. I’m not going to let other people dictate what I do or don’t like. I guess I just don’t care about what other people think anymore lol