Jokes on you, i have a Metr Pro module!
But i still need to open it again so i can put some heatshrink on the phase wires and Glue the holes shut.
Jokes on you, i have a Metr Pro module!
But i still need to open it again so i can put some heatshrink on the phase wires and Glue the holes shut.
Lol we’ll see. Something will come up. Something always comes up.
Nitrous oxide switch
Well…Usb here i come. The Motor spins in the wrong direction but swapping phase wires doesn’t help.
Phase wires should not be swapped after motor detection. Quote by Vedder.
Slap the Bass!
sk8tan-2
@xsynatic-0
Is he the doctor of the VESC actually?
So it’s officially Dr. Vedder now?
Seems like it.
Well deserved. He’s a humble beast of a man.
The new most underpaid employee at Trampa
@b264 yes, although he had his dispute last year etc, he got the diploma now or w/e. Had that thesis since last year, been cleaning my mancave.
Hes also gets hourly wage now from trampa with the increasing demands on the 75/300 and other coming vescs. So I highly doubt that since he works like…all the time
@BigZwatt is getting his for testing in the next few days, once he mounts them and gives them some testing I’ll make a thread for street side versions of my lights. Maybe a week?
Ya. I’ll throw them on my current at build and let ypu know probably won’t get to it til Saturday tho. Maybe earlier tho.
Can’t you just swap the motor direction in the metr app?
I could. Not sure if metr has it because haven’t found it yet. Also i don’t like using the reverse Motor function because the motor always spins in the previous “wrong” direction for a tiny bit and then in the new correct way.
You can download it as a pdf.
Found it
It’s in the expert menu. you will just have to keep scrolling.
Hmm weird. Haven’t experienced that. maybe because only one of my motors are running reverse.