@b264 yes, although he had his dispute last year etc, he got the diploma now or w/e. Had that thesis since last year, been cleaning my mancave.
Hes also gets hourly wage now from trampa with the increasing demands on the 75/300 and other coming vescs. So I highly doubt that since he works like…all the time 
@BigZwatt is getting his for testing in the next few days, once he mounts them and gives them some testing I’ll make a thread for street side versions of my lights. Maybe a week?
Ya. I’ll throw them on my current at build and let ypu know probably won’t get to it til Saturday tho. Maybe earlier tho.
Can’t you just swap the motor direction in the metr app?
I could. Not sure if metr has it because haven’t found it yet. Also i don’t like using the reverse Motor function because the motor always spins in the previous “wrong” direction for a tiny bit and then in the new correct way.
You can download it as a pdf.
Found it
It’s in the expert menu. you will just have to keep scrolling.
Hmm weird. Haven’t experienced that. maybe because only one of my motors are running reverse.
Fuse == good
Where to get? How much?
Shortend two chargers to death last week in only 2min. Root caused by unsober charge port soldering… Fuse could have helped
Amazon 37 bucks. I first found it on Alibaba then searched Amazon found it for 37 and shipping was 10 bucks…but i got it a month earlier through Amazon.
Although it’s amazon but based on arrive time and it’s third party it seems it’s shipped from China
Yes…
I can take a pic of the fuse when I get home for ya. But these are glass tube fuses. Hard to solder
You should always fuse the charge port also in the esk8
https://www.mouser.com/ProductDetail/576-099707.5WXN
These solder great and are very small
Ya beat me to it. Btw @b264 if we have a fuse inside our chargers, should we still fuse the wire on charge port? Or is this just adding redundancy?
That fuse is on the input side of the charger.
Ouch! While riding or accident? When hangers split like that makes me freak out 
I hope you are fine.
Fortunately this isn’t my board but someone elses.
Snapped Hex XL
