Reply to "Pictures and nothing else" thread

They just made a 3 mile long stretch of perfectly paved path along the lake :blush: I’m going to go again today. It is called the sand harbor bike path up in north shore Tahoe

2 Likes

I know we’re just got a new trial for our river i can’t wait to go test it out

@professor_shartsis where did you take these? I suppose nowhere near SF

I’ve trying to take some like these for years, but my camera+lens combo doesn’t help, neither the massive light pollution anywhere near me

This is my best so far

7 Likes

@Pedrodemio I used 14mm 2.8f 2000iso 10sec on a full frame sensor in raw mode

about 150 miles north of san francisco along I-5

5 Likes
6 Likes


New to the grocery store :arrow_right: esk8s!

1 Like

Yo im at Lidl what isle is that

Somehow we all end up with similar interests everywhere :innocent:

6 Likes

I used clean breeze on my cells. Am I fucked?

4 Likes

Beautiful picture

1 Like

I saw someone’s post about $25 tire that doesn’t last long. And it reminded me of this post on the other forum. These “6x2 fastwheel” tires are dirt cheap and last a long time(~2000km based on my tread wear rate, I have already done 1000km). We shouldn’t be overpaying.

link1: https://item.taobao.com/item.htm?spm=a21wu.10013406.0.0.2d29317egeiJ2t&id=558643804538
link2: https://item.taobao.com/item.htm?spm=a21wu.10013406.0.0.2d29317egeiJ2t&id=564165887103

3 Likes

How do you wrap the wires coming out the motor like that? Is it just heat shrink slid over the mesh and into the holes in the motor face?

1 Like

https://item.taobao.com/item.htm?spm=a230r.1.14.1.32b14883Bqga0M&id=554868313483&ns=1&abbucket=2#detail

1 Like

Is there some easy way to convert the site to English to make ordering possible for me :joy:

2 Likes

This is the easiest option

https://www.superbuy.com/

2 Likes

No, not really. That should even give you some extra freshness :point_up::relieved:

1 Like

You obviously put hand warmers In the enclosure during the winter @b264 :roll_eyes:

3 Likes

You shouldn’t charge any lithium batteries below this temperature, whatever your BMS. You will damage your batteries, unless you charge at a really low rate, something like 0.02C.

charging is one thing which might not be the problem here as he will do that probably at home anyway.
the question is, will the components on the bms get damaged by having the bms hooked up at temp below 0. I mean the bms even in charge only is always switched on even if not actually charging and balancing.

1 Like

Shouldn’t the heat generated from use keep it toasty enough? Enclosures are generally well insulated