It wasn’t cheap LoL
2 Likes
I don’t care what it is just tell how much to paypal you.
2 Likes
Oh lawd chonks is commin’
2 Likes
They look like Saite motors to me 
4 Likes
They’re
Aps
Saite and now those. But damn. They look nice 
2 Likes
We were working for a couple month with our suppliers to customize all parts we will use in the Titan Project X. We were not entirely pleased with the MT 6396 and especially with their service. So we tried a couple of other manufacturers to team up with them.
The cooperation resulted in those beauties or should I say beasts?
We changed quite a lot from the basic model. On our list was:
50xx and 60xx bolt pattern
open can design on both ends for better thermal proprieties
cable routing on the side with robust and secure connection
curved magnets on both sides for stator and rotor
lowering the gap between magnets to increase efficiency
10mm shaft with keyway
special heat resistent glue for the magnets
special heat resistent copper coating
slightly higher KV than our previous motors to increase further the efficiency
higher quality inner bearings for less heat and again better efficiency
Hall sensor and temperature sensor
stealth laser printed anti corrosion logo
everything together should result in one of the MOST POWERFUL 63xx motors out there 
We plan to test them with 6KW continues and 10KW peak phase power per motor.
Testing results will take a little since I got injured while testing a board and got a knie surgery last week.
But believe me, I’m at least as pumped as you are to stress test these babies.
7 Likes
Woah. Nice work brother. They look great!!
No many people are willing to say that as maytech have probably been some of the most reliable motors around BUT it’s nice to see there will be options widely available in a near future 
1 Like
Thanks, I appreciate it.
MT was/is one of the best available motor manufacturers. But that doesn’t mean they are great. Ofc we tested them along with FS, APS, Saite and others, but as everybody knows by now, I am obsessed with power and reliability. I am also quite sensitive with customer service and if I am not satisfied with those things I’m gonna do it by myself.
2 Likes
How should this be possible? Elephant on single motor until the magic smoke appears?
Just as an example, this is a log file of mine, peak was 208A motors and 104A battery which is almost 4.5kW for both motors so 2.25kW each motor.
I know this is at 55% duty cycle (21.45V including voltage sag) but for 6kW each motor you have to pull 120A at 95% duty cycle at 12s. Have you ever pulled that much at top speed?
Usually the motor needs less amps at higher speed because of higher voltage.
2 Likes
tow a small car uphill 
seems like a legit test
3 Likes
at top speed? I prefer to live…
1 Like
20kw is like 30hp that is more hen enough to pull a small car
We are talking the power of a car on 20kg skateboard
1 Like
good to know thanks!
1 Like
There’s always something to be learned.
You’re welcome.
oh faaaak I knew I should have waved the sarcasm flag
1 Like