šŸ–¼ Reply to ā€œPictures and nothing elseā€ thread_2020_summer

Media
#9735

Confirmed, I carry a lock pick but no Torx security bits.

Now I know what needs to happenā€¦

6 Likes
#9736

Thats sick, beautifull work! How big will the battery box become?

1 Like
#9737

:rofl:
Iā€™m sure if you had a cool greens superintendent they would let you it is electric and lighter than a golf cart
I wish I had a esk8 when I worked at TPC Valencia

1 Like
#9738

Thereā€™s never really an ā€œanti-theftā€ for anything, itā€™s basically all just theft deterrent. In the mighty words of the Lock Picking Lawyer, anyone who is determined enough will find a way through. Thieves are mainly opportunists, not bank robbers, inconvenience is a wonderful deterrent :joy:. Just my two cents (still donā€™t trust anyone enough to leave my board unattended thoughā€¦)

Edit: I understand your point about the screw and agree partially but itā€™s a simple mod šŸ¤·

5 Likes
#9739

Depends which battery I have fitted on any given day.

2 Likes
#9740

This is frame twenty-two requesting air strike engagement, target has been located. I repeat, target has been located.

3 Likes
#9741

feel free to visit lol

#9742

Its just a deterrent to an opportunist.

5 Likes
#9743

20210617_224521
20210617_2245214032Ɨ3024 1.55 MB

As promised. Just a little later :rofl:

8 Likes
#9744

3 Likes
#9745

@3DServisas whatā€™s that? gear puller?

2 Likes
#9746

https://www.instagram.com/reel/CQPLrbBhch9/?utm_medium=copy_link

#9747

Nice build :star_struck:
Are you worried about those motors they look pretty low

5 Likes
#9748

i would imagine one up the angle will hit the baseplate?

2 Likes
#9749

He has bn adjustables maybe change the degree :thinking:

1 Like
#9750

Thanks man!

Yeahhhh I kind of am.
@frame I am going to look into raising them one notch.
As of now though, raising them hits the really long riptide bolts. I am going to cut them down and see if the motors will still hit.
I can always raise the degree of the baseplate, which I might do. However @RipTideSports advised that 50 in the front and 30 in the rear would be optimal.

The 50* in the front actually gets a tad bit of wheel bite, so I might end up either sanding the deck or dropping that to 40*

2 Likes
#9751

if i were u, i would try 40 up front before thinking about sanding the deck, its a beautiful deck that i wouldnā€™t want to ruin it

2 Likes
#9752

I am 100% with you on that one.

Also, as of now I have roughlyyy 24mm of ground clearance from the motor/gear driveā€™s lowest point.

2 Likes
#9753

Iā€™m not a speed demon but I like 50/50
Or 40/40
Or back 40 front 50

3 Likes
#9754

Whatever you do keep it drop through that looks sick love it :star_struck:

2 Likes