The fit isn’t ideal on the hanger so maybe something would fit better, or it might just be the tolerances on the truck. I’ve not really looked into my options but the fitment is just so loose without tightening the screws I feel it could be better.
And I’d have to tap through the mount hole as well to fit a larger bolt if I redo the threads on the hanger. That’s a really thick piece of metal for my drill to handle. And it would be really close to an oversize hole as the mount isn’t very wide.
Just an idea. If you have better options, like a new mount, that’s probably ideal, but if its stopping you from riding, then there’s many possibilities, like shims. Your drill can probably drill through that mount np with the right bit.
It’s not stopping me, just need to bring a 3mm hex wrench for those little bastards when I notice it getting loose but lately it has been secure though admittedly I haven’t been riding as much as I used to. It is annoying to think about and definitely not safe when it does get loose but I can usually tell when it gets loose. I think one big impact would knock it loose but normal riding it’s ok generally but that’s not good enough.
I have added a nickel strip as a shim to get the fit better but it doesn’t help as much as I thought but it still helps.
I just want a precision mount & truck now.
For sure
great job lads!
Beautiful job
Thanks c:
What is this ?
Looks like a nice solid frame to mount a tracked drive system to!
@nowind, if this means you’re setting up to sell these badboys, you’re going to be a very rich man (and I and many others will be slightly poorer).
Dude, if you need something forwarded to you, just let me know.
X) it sounds like somebody’s getting fired
Wow that’s some serious shit
I wonder what ESCs he’s using on that thing
he has two 75/300 trampa vescs