Fishing for compliments.
10 Likes
Both of you are beautiful.
7 Likes
Prrrrrrrrrrrrf this is so deplorable… my god. Why this ultra aggressive and disrespectful attitude? 
7 Likes
How man that’s a gorgeous board ! How did you do the logo thing ? It’s all el isn’t it ?
We need a build thread for this beauty !
9 Likes
This skate looks like it’s going to start yelling and try to upgrade me
3 Likes
Yeah, hahahaha, had problems with phase wires touching the receiver bc the rheostatic brake was added to the wrong position. The last rainy days i decided to rework the whole drives with new custom motor mounts, new plugs and pipapo plus a new surface, bc the frames were pretty beaten up.
2 Likes
I fthis is a hint to cut off the base plate section from the frame I can tell you this is an old idea for me 
the only thing is it wouldnt make a difference for me so no reason so far. 
1 Like
Removed the tape for 1 second to check something and while tightening the too bus bar it moved down and make contact for half a second. All the groups still read 3.53V 42.40V for the pack. Am I still good?
1 Like
You’re fine, if you really want to check you can take the cells out and measure internal resistance but realistically, its burned up and sparking because there is a very resistive short, you’d be worse off if it connected without sparks because you’d be shorting unbottlenecked massive amperage
3 Likes
I’m sure you have figured this out now, but for anyone else reading, you should always insert both bolts before snugging up either of them.
3 Likes
6394 170kv? 
7 Likes
6384 in 140, 170, and 190.
Also those 14T are technically in stock 
6 Likes
Damn dude when can I buy a pair? 
I’m riding 190s on my mountainboard but wanna up the torque!
And oooo I’ll let my cousin know, he’s been trying to get some haha.
Edit: they say out of stock? Haha
1 Like
If you want the motors, I can offer them you now through PM. They’re super easy to ship. Same goes for the pulleys. I’m done unpacking everything so it’s shipping time 
10 Likes
15 Likes
Can we go back to talking about the 4WD eMTB built out of OneWheel hub motors? That was way more fun.
Anywho, skateboards. Sorry for the mess folks. Damon will be back from the beach on Monday and boy am I in trouble.
4 Likes
Guys please, we really don’t need another drama… can we get back to building and riding, and sometimes throw some non offensive memes around
6 Likes
I promise to retire from making memes.
1 Like
8 Likes