I was about to say, that’s an aesthetic of its own, but I hope the deck didn’t get damaged from whatever happened.
1 Like
He put the deck in the way of the Photoshop and now it looks burned.
6 Likes
got any inside pics/dimensions/weights to share?
Not yet, they are in production. They just sent me a pic of the first can. Flipsky does not have a battle hardened version of the 6384s on the site, but should be:
- Max Power: 4000 Watts
- Max Current: 95 Amps
- Max Volts: 4-13S
- Max Torque: 9Nm
- Motor Resistance: 0.05Ohm
- Recommend ESC:VESC4&VESC6(3-12S ) <-----LOL i will be running 16-18s
- Weight: 1100g
- The motor length:84mm
- The motor diameter: 63mm
3 Likes
@Yeahthatperson what settings to run 16s with these? we were just taking about this here: Boardnamics M1 Gear Drive + Other News - #1790 by b264 would love to have your input.
1 Like
yo,
can you show how the esc compartment works?
2 Likes
Cant wait to dive into this and make a video. Super hyped
5 Likes
I swear on my life, behind that flag and house symbol, there is an “I 
”
4 Likes
Time for a Redember 44 or evo?
4 Likes
What size battery were you thinking to push these motors the way you want 
1 Like
Backfire zealot deck lmao
2 Likes
Would love a Red Ember but I hear that would take quite some time.
4 Likes
What happened?? I may have an extra zealot deck I could part with.
1 Like
Caught the lip of a raised driveway just right. Brought the board to a complete stop at around 10mph. I ran it off, but the energy went from wheels, through board and into my heel. Can’t even put weight on it today.
This was a G3 Plus deck that was borderline too flexible for this enclosure. Zealot would definitely be too flexy. Gonna go a new direction here and use an option that has a purpose built enclosure for it.
4 Likes
Thats what I have, disappointed the core is foam. Zealot deck has garbage flex.
That would be ideal
1 Like
they marketed it as pure carbon fibre deck
3 Likes
Well the CF that’s in there is pure CF 
I think @Mikenopolis shared a pic of a broken one, not sure if it was his or not.
@ChrisLips Will you snap that end off and show some pics of the core?
3 Likes
if u can, try to scratch the “non CF” part and see what’s under the black paint?
3 Likes
I’m guessing it’s GF
3 Likes