Might need a vacuum and a chamber so you can degas that epoxy. The only way it could look better is without the bubbles 
Looks great though, do you apply with a syringe?
1 Like
Nope, just a toothpick and elbow grease from the bottom of a used dog food tin.
Yeah, gas bubbles are always an issue for me. I did actually pop some of the bigger ones.
I really want to design a 3dp part that lets you flush mount the female end and still let it fit around.
But why? There are more reasons than just that to use the female end as the key.
I fail to understand what problem that solves; it seems to create more possible issues.
1 Like
You’re getting really good at that.
1 Like
It was a love and hate relationship but, Its time to say Goodbye. Side note, those wires are driving me crazy. I gotta fix that😬
2 Likes
Best buy, home depot, and many more big-bix stores take rechargeable lithium ion batteries for recycling. Just make sure everything is taped up good and has no chance of shorting.
I made a disassembly guide a while back, if you want to go maximum safety/maximum effort. Or just drop it off as is 
1 Like
I think I’ll give that disassembly guide a go. I wanna see how this thing is put together. Thx
1 Like
Do you have a video of this in action?
10 Likes
I do have, but my girlfriend does look a bit scared on it, soooo 
not sure if I will post it.
That was just a test drive today. If snow will not disappear, we will do some more runs in next time. Was super fun.
9 Likes
+1 reason to move to Spb 
3 Likes
Here is the right thread 
Yes it is,
I aim to make a super lightweight and super low on ground comuter.
From what i’ve seen so far, it serves well this purpose: great for carving, easy to grab from the ground and flexy enough so i don’t suffer from the road bumps even on 85mm hub motors.
What makes it a deck “you don’t trust” ?
1 Like
I love my drop cat so much for pushing. I can’t wait to see yours in action!
2 Likes
Ok ok, I got the ok from the big boss 
Here we go
2 Likes
Why you not yet here?!? Dawei dawei
1 Like
I think every russian in his-20s tries to move there if something goes wrong in his life, xd
2 Likes
I thought it’s Moscow
2 Likes
I played a bit with the “hugly box” option, and now i’m waiting to salvage a connector board for the exway hubs to try the “carbon fibre and lipo” version
2 Likes
I agree with Brian. There’s no point, when you’re riding, the key fills the hole. When you’re not, if you must, you could 3dp a bung to fit in it when it’s not in use.
I see no reason, also the female end is much harder to mount because of aforementioned reasons by Brian
2 Likes
Gah. You’re right. I can’t see to find any ready to buy xt90 panel mounts 