🖼 Reply to “Pictures and nothing else” thread_2020_summer


I really want one as well. Did you get ND filters for it? If not, check freewell filters. Also you know it doesn’t have active track function?

2 Likes

@jujo my old deck is warped at one end but I’m Goofy so it is kinda warped the good way.

So why did I do that thing?

Check the lines of the hanger vs the horizon line of the deck :kiss:

4 Likes

That must have been the same company that has sent to me this piece of heatshrink tubing.

15 Likes

I did not know for the filters. I’ll look into that thx.
As for tracking, I knew it wasn’t an option. But @kook mentioned a third party program (Litchi) that unlocks all the options for any dji drone. They’re currently working on making the mavic mini compatible. Dji just released the mini’s source codes this month.
Once litchi has mini in their list I might buy the app and try it out

1 Like

may I interest you in

On the other hand that stuff does stink to high heaven. Less pleasant than regular tapes and such.

5 Likes


Can I see the bottom side. I don’t inderstand how the series connections work

3 Likes

Each P group has a tab that passes through the pcb and welded / soldered on the bottom side.

8 Likes

How is the connection made. Pos to neg

5 Likes

Here’s a screenshot out of @BenjaminF expert build guide. The nickel tabs are in direct contact so it’s in series

6 Likes

Ohhh…ok. got it. Thx

4 Likes

:blush:

2 Likes

LoL no way :slight_smile:

This is for batteries :wink:

3 Likes

@b264 I wonder if someone with unlimited stocks of liquid tape could engulf a pack in it and call it a day :thinking:

2 Likes

my thinking was if you needed to seal some connections and didn’t want to ruin the clear look with a bunch of colored spooge.

I have been thinking of making a clear polycarb deck and I have tried to figure out everything clear I could use.

The zoobomb wheels were just what I needed.

I’ve thought about potting a battery in epoxy

4 Likes

Get him, @Jujo

4 Likes

My soul is as broken as this deck I’ve been waiting since last November for.

And I’m 5’5 and 180lbs. I feel obese lol

4 Likes

I hit a big curb on my Trampa a while back and went head over heels immediately. Anyhow, I bent the kingpin in such a way that I have to put more weight forward, towards my toes, because the board wanted to pull to the left. I ordered a new kingpin and I rode it around all jacked up while I waited for the kingpin to arrive. I actually got used to riding it like that, and it even made me wonder if a 60/40 weight distribution, is better than 50/50. If you begin to lose your balance, it seems that you are more inclined to quickly recover it.

I’m going to experiment with tightening one side of the springs more than the other.

Yes, me too. I’m still thinking about potting this current 12s10p pack I’m in the middle of. I just have these nightmare visions of 120 battery cells flying through the forest, and it’s hard to imagine the forces involved in crashes.

3 Likes

If you do, please do a writeup of how it works and which potting compound you used :yum:

5 Likes