Awesome dude! Keep up the good work my guy!
Dont worry i wont tell joon *******i xD
Why didn’t this get 100 likes?
2 Likes
EcowMoobl
3 Likes
I’m ahead of my time mate 🤷
4 Likes
Sooo… who’s going to buy them?
What are we looking at here, 20s8p for an ebike? 
1 Like
Not until theyve seen some streets. I heard enough horror stories about the original cloudwheels.
These do look far better though, imo. Aesthetically, because cloud wheels are ugly af, but also functionally.
Yep this 20s8p p42a pack is replacing the 20s8p “tesla” pack in my bike currently. Basically I’m swapping my old Mario set up to my Z1 project (that I just got back from powder coat):
Then the mario it gunna be set up to push up to 16.4kw if Idecide to max it out 
I’m only pushing a little over 6kw right now on a topped up pack so this should be an interesting change of pace.
3 Likes
Yeah, it’s super unfortunate because I absolutely love tesla but I don’t support their work practices
Their stuff is soo cool but I got disappointed once I started actually looking into it
I’m happy with the work culture at my current workplace
2 Likes
Tesla does require mandatory overtime but I used to work at NUMMI and the hourly pay was more but the compensation was less because of stock options. I know Tesla employees who are millionaires because of stock options and these are regular line workers who are still working. I’m guessing the offer was a lower than expected hourly rate with stock options as compensation. If you believe in the company and believe past trends will hold than it’ll be worth it in the long run.
Dont you need a significant larger motor for that?
I’m going from a “3kw” qs205 knock off to a “5kw” qs205 knock off and adding ferro fluid plus “hub sink” cooling fins to accommodate the increase in power.
I know of a few guys who’ve successfully run the 150a version of the controller I’ll be running without any of that cool stuff for the motor. My controller will be able to do 200a, should be fiiiiiiine
Looking good what’s the plan for the battery and trucks/motors?
Where is the pink 
2 Likes
Battery is an mboards 10s3p at the moment… Barely fits in this enclosure due to being a stiff pack, had to use some pretty thick foam weatherproofing. Working fine at the moment but the TB40 deck being curved I would eventually like to get a flexible pack. I think I’m gonna try and match my last deck and try to paint the edges of the deck pink on this one.
Trucks are BN 270 with their idler mounts using pink riptide 87.5a bushings that I bought basically every type of to try and figure out what I like. Also running evolve 6"wheels with 47t pulleys.
Motors are mboards 6374 180kv as well but soon to be replaced as I just picked up some flipsky bh 6368 190kv cuz they were only $50. I’m also using pink cable sleeving for the phase wires.
I really gotta make a build thread at some point going over all the changes I made from my initial setup haha. So far I’ve been through 2 sets of wheels, 3 trucks, a deck, and an enclosure trying to get this thing to a state that I’m actually happy with. As you all can tell I absolutely didn’t do enough research when buying parts initially. Also greatly overestimated how good the roads are around me…
5 Likes
Lol 
I totally hear you I have like every esk8 rkp setup
And then I got into channel trucks 
You can never have too many esk8 parts 
2 Likes
@DeadLightning I know you can sand the black off the edges and maybe have some fun with
https://www.dickblick.com/items/uni-posca-paint-marker-fluorescent-pink-broad-chisel-tip-8-mm/
1 Like
Might give that a shot, was probably just gonna mask it off and spray paint it.
1 Like
inspiration for you
7 Likes
Oooo they arrived alright!
2 Likes