i usually expose them on track days.
when traveling on tires that are pretty worn i never break through them soā¦ so I donāt tend to worryā¦
on track daysā¦ i know if Iām gonna break through and iām starting to be able to feel when.
oh I stopped rotating. i do two new tires front or back. or one used tire from the previous new swap out.
yeah not sureā¦ it does look a little off center this time but itās partially the shotā¦ and the way it tore. I can feel them open up sometimes on a turn.
I think the rings are here somewhere, if not, I can post soon, these were made for superstars long time ago, so I will be making some that fits better on MBS
Did you try fivestars out at all? They take 9" hubs well and 10" hubs with a bit of hang over of the hub. These look sick and I want to try 10" wheels out bad.
But if this donāt work I will probably get them. I wonāt be running 10", they probably will take a way too big hit on range, and Iām kinda scared of pumping them higher than 24 psi on these printed spacers, but will use for the 9" that are coming
Put some hot glue over it, to prevent shit from going inside the usb port. And no it wasnāt all at once. Layer by layer, left to right so nothing seeps in.
Could you elaborate? I removed black hot glue from the Bluetooth module on my Xenith to install a Xenigotchi. I didnāt think much about it other than being surprised at the color Iām not used to. It was pretty simple. I plan to use more (regular) hot glue to attach the new module per BKBās suggestion.
I just put the hotglue over the port the first time a few minutes ago. It doesnāt really need it as I donāt really have dirt inside the enclosure but i thought it wonāt hurt.