i would love a picatinny matrix II clamp, kina like Kaly’s for gun lights.
4 Likes
COOL!
DM me your info and I’ll mail you out some brackets and mounts I have if you like.
1 Like
Legend! Thats perfect thanks! Saves me heaps of time.
My current plan is a modular design that will have options for shred lights, picatinny rail and bull bars. I will see how I go at achieving this
5 Likes
I found it was not too inconvenient/bulky to use a SL200 on a metal bracket then that metal bracket screwed to a gopro mount, case you were looking for any stupid ideas.
2 Likes
Ay good timing check these out!
I will grab a set to review!
6 Likes
Speaking of Surfrodz RKP, @Tony_Stark do you have any plans on making mounts for them? Janux is out of the esk8 business and finding mounts for them is really hard
1 Like
Probably not for the RKP ones unfortunately. The tapered hangar doesn’t gel well with the universal clamping systems I have come up with. I have made mounts for those in the past and wasn’t planning on doing it again unless someone gives me a lot of money or orders 10 sets.
4 Likes
You should make a couple bull bars for Airs and matrix like the ones you made for @glyphiks, those looked amazing, I know I would buy one.
2 Likes
I think I scarred Liam for life with those bullbars.
These will come in handy for something… some day.
6 Likes
I saw them on your build then asked him about them and he said they were only for you 
3 Likes
Ok guys so how about this? Utilises existing shred light mounting brackets, allows for one or two shred lights, adjustable angle and position on the hangar. The base clamp was made to be universal so I can make other attachments in future like picatinny rails and bull bars.
If you guys are happy with this solution I will machine some prototypes and get them on a board for testing, and if theres no issues I’ll get a bunch made and stock them as a product😁
(Also don’t judge my shred lights)
14 Likes
You could probably make the bracket come down 1CM to give it better deck clearance.
I was imagining a verticle design in my head and wasn’t expecting this, I like the simplicity of it.
6 Likes
Yeah I will do that. Thanks
The titanium hardware has arrived! The only thing that we didn’t custom design were the motor screws 
11 Likes
These are our custom made M5 deck bolts. They support a larger 4mm hex (same as cap screw heads) and have a 14mm straight shank to provide the most strength where its needed. Made from 6AL4V Titanium in oil slick and burnt blue (my favourite) finishes.
15 Likes
For those that prefer a cleaner look or don’t want to cover their deck with an anti-sink plate, we created these titanium anti-sink washers. I so wish I had a carbon deck to put these on…
17 Likes
We are also temporarily doing free standard shipping on orders over 200 AUD (~150 USD). Just use code FREESHIP on checkout🤙
2 Likes
lol whoops 
Fix it on the next lot
5 Likes