Public chat - talk about everything with everyone

Media
,
#952

fax man i need to order a new one soon

2 Likes
#953

I managed to fit two 6384 motors on the 177mm SR TKP hanger but the ground clearance is not exactly what I would call abundant. :sweat_smile:

IMG_4347
IMG_43474032Ɨ3024 2.74 MB

IMG_4350
IMG_43504032Ɨ2314 1.92 MB

So I was thinkingā€¦ how bad idea would it be to use two different motors? They have different kv but not too different. The bigger Reachertech 6384 is 170kv and the smaller Maytech 6355 is 190kv. Should I test if for science? :thinking:

IMG_4349
IMG_43494032Ɨ3024 3.01 MB

6 Likes
#954

You could do it like this xD

6 Likes
#955

Haha, why havenā€™t I thought of that?! So many possibilities!

2 Likes
#956

Keep in mind your wheel will throw dust at your motor. A 3d-printed guard between the two would solve that though

4 Likes
#957
??

šŸ–¼ Pictures and Nothing Else! - #7229 by zZoKo

wtf its so small

#958

trying to hold back from saying it

5 Likes
#959

That opens up the opportunity to throw whatever motor you want on any build. Thatā€™s clever.

1 Like
#960

will look stupid if the motor is out way further then the wheel

other option is to move the mounts all the way towards the kingpin and then create some spacer between the pulley and the wheel (same thing as with the motor)

1 Like
#961

I didnā€™t think that far into it but yes that would look dumb.

Iā€™m not following the the close to the kingpin mount. That would only work if the shaft was hanging off the other side of the can right?

1 Like
#962

yeah still mounted oposite direction but it would mean the motors wouldnt extend much further then the wheels

1 Like
#963

Itā€™s done!

IMG_4354
IMG_43544032Ɨ3024 3.07 MB

14 Likes
#964

oh no, my OCDā€¦must resist :tired_face:

7 Likes
#965

@PROJECTFAP must be one of the nicest strangers iā€™ve encountered. He sent me these custom made bushing seats for free. They look awesome!
Thanks!

IMG_20210713_153402
IMG_20210713_1534021846Ɨ4000 1.62 MB

10 Likes
#966

does anybody elseā€™s vx1 not show full battery bars? it set to 10s both in remote and vesc but it only shows 2 bars full and the battery is like 95% charged

edit: figured it out the solder wasnt connected fully and kept losing contact

#967

Snapchat-1744572095
Snapchat-17445720951314Ɨ2560 443 KB

1 Like
#968

Yo thatā€™s low key awesome. What an awesome person. Iā€™d shout him out here to make it official if you have time

4 Likes
#969

if i connect the screen straight to the vesc xt90 will it stay on 24/7?

i dont think i have a mofset for the negative wire

#970

That motor will be thrashed in a week. Looks cool though

1 Like
#971

@onloop what the hell did you do to the builders forum

2 Likes