So my theory was that the BMS was not working correctly.
Bought a replacement Daly from Ben, and soldered it at the airbnb with tools from Damon.
This was my make-shift soldering station:
But before I started I duct-taped the smoke detector so that it wouldn’t trigger.
Fuck it, it’s Portland.
And yet, the problem persisted! I even tried with a 6A charger. And tested with a multimeter that all the phase wires are in correct order. My last guess is that both chargers were trying to go to constant voltage mode and were set too high, so the BMS cuts them off, but wow! What a problem…
Since @bboybowzer has kindly lended his board, I’ll use that for the last few days, and fix my board back in Latvia.
