I hear what he said about the single motor let off, I really think negative throttle rate will help you fix this instead of deal with this. It makes it so you don’t just drop momentum immediately when letting go of throttle. Happy to fuck off and stop suggesting as well, I just like you 
3 Likes
Hi!
Curious how many mm are your pulleys?
I’m going to buy belts and I have 15mm pulleys should I buy 15mm or 12mm belts?
Wider belts are always better if you have the room
1 Like
Is there a way to remove the chin strap on a TSG Pass without cutting it? It keeps getting in the way and I never use it, but I still want the possibility to use it if I ever go fast
1 Like
Might as well take the helmet off if you aren’t gonna use the strap! But seriously even if the helmet fits tight without it wear the strap and do it up as tight as you can comfortably.
1 Like
There is an audible pop when I pull it off my head and it’s never come loose but that’s a fair point. The problem is I will be getting on and off the board 20 times a day because classes
1 Like
Buy a half shell for classes would be my recommendation. They are a pain getting on and off that’s for sure. I’ve got a half shell to run quick errands when I’m not planning on ripping around.
4 Likes
Which one, if either are correct?
B- balance lead is used. B- port is not.
or this
B- balance lead is skipped and not used. B- port is.
Or is there some other way I am suppose to do this.
Thanks
I got a half decent one actually, it’s the one I used before getting the Pass and its pretty comfy so I’ll use that then
2 Likes
So the B- balance lead does nothing and can just be cut off?
No, B- has to go to neg of the batt pack
Ha! I put mine on POS.
3 Likes
So I put both the B- lead to the B-, and also solder on another wire to B- port and put that to B-?
Motor pulleys are 16T 5HTD 15mm from torqueboards.
1 Like
You put b- balance on the battery AND a wire from b- bms terminal to your battery
That works just fine 
Do you have a photo?