Noob question thread! 2020_Summer

[AK1]

Noob question thread! 2020_Summer

I have two 80100s detecting individually on 75/200 VESCs all brand new… Motor 1) Detects perfectly, has ~20mOhm resistance detected and marks it as ~60A Motor (Odd, but it detected so ill deal with the low amperage later because I was expecting 100+) Motor 2) At first refused to detect giving me “could not detect sensor issues”(regardless of having them plugged in or not). VESC had 3 green lights, and one blue, and one red blinking one, where as the okay VESC had 3 green and one blue. Reflashe…

Large Update to this

I only updated the firmware on one 75200… Only one did not work when trying to configure motors. I thought why don’t I update both. Now none work. How could upgrading the software do this, and if so, is there a way to revert? Is there some stable version for this model?

Using MacOS with “5.3” loaded. Seems to have software broken the 75200’s…

Should I try to download and flash this?
https://github.com/vedderb/vesc_tool/tree/master/res/firmwares/75_300_R3