*SCAM ALERT* neoBOX open source Focbox variant (HW 4 and HW6 Design)

It’s SIX posts above. #1632.

13 Likes

Oh sorry, not sure how I missed that.

How long will the warranty be?

1 Like

Don’t you mean #1732?

1 Like

Is one year warranty for manufacturing defect.

7 Likes

LiFePO4 is usually 3.65V / cell at full charge.

I use 12S a lot and it’s 43.8V

3 Likes

I’m on A123. 3.3v nominal, 3.6v full. It actually drops to 3.3v under load pretty quickly, and kind of stays there.

Smartbms. Focbox.

1 Like

@deucesdown @b264 are these limits self imposed to extend life or recommended by manufacturer spec?

Good to know, thanks.

Imagine doing 20 hour shifts test riding a board around a factory. :sweat_smile:

3 Likes

Very quick trips to the bathroom at least

4 Likes

They would need quick trips to the dunny after sinking all the 750ml Tsingtaos

5 Likes

He ride around Shenzhen, not our factory.

9 Likes

It’s called sarcasm, Jeff

2 Likes

I not know this word friend, sorry.

16 Likes

No don’t be sorry haha

A good example is, imagine you arrive in London and say

‘’ oh look, it’s sunny! ‘’

That is sarcasm :wink:

8 Likes

No they are set by the chemistry. 3.65V charge voltage but they are somewhat tolerant to overcharge, unlike li-ion. You should still stop at 3.65V/cell

For neoBOX, this is 14S or so

1 Like

This is actually irony. But hey, you tried! (This is sarcasm) :smile:

18 Likes

You truly do have the most powerful board on the market!

18 Likes

Thats funny, because it’s true!

ah good point, i reread the definition of irony

5 Likes

English Lessons Below :slightly_smiling_face:

1 Like