Arch Linux, Gnome bluetooth stack. It usually asks for codes for keyboards and stuff, surprised it didn’t for the metr. (We should take this to PMs maybe, but I’m going out for a ride rn 
)
1 Like
Will test that one when I have a chance
3 Likes
Not sure if anyone has raised this complaint before. On mobile, when viewing an uploaded log, it is very hard to navigate through the data accurately, because both the cursor line and the data graph move when I touch and drag.
I think it would be much more intuitive if it worked like it does in the app, where the cursor does not move, and you scroll through the data by moving the graph to line up with the stationary cursor.
Not sure if that explanation makes sense. Anyone else have this problem?
5 Likes
v5.4 seems not to freeze
1 Like
I know what you mean. Especially at the beginning or the end when it doesn’t scroll anymore and tapping is the only (in this case fairly inaccurate) way to get to a certain spot.
2 Likes
Thanks!
1 Like
Hello
I have the Metr Pro Module (updated to newest FW 5.4 via Android) and I am using an iPhone 11 with the newest iOS.
I cannot find my metr module anymore. I can’t find it in the app and also not when I look for bluetooth devices.
The Module works on my Android Phone.
Any ideas ?
Thanks
1 Like
Please go to iPhone settings -> bluetooth and hit the small “i” icon beside the module in your device list to ignore it. Then search again for the Metr Pro inside metr app.
4 Likes
Nevermind @hexakopter
Somehow uninstalling the metr app and resetting all settings resolved my issues… Thanks
2 Likes
hey. have now tryed reseting app and reinstall it but still get same problem with read-only not able to turn off. anyone know what might be the problem?
This is what happens:
I fixed this read-only bug in the latest version v4.2.40 (submitted to app stores, but still pending review). Hopefully out soon.
1 Like
nice to hear! thank you
I just updated to Metr FW 5.4 and Unity FW 5.1
I get Realtime data from the app and my watch but Expert and Modes don’t work 
How much longer until Unity FW 5 support? I can always downgrade because I honestly rather have Metr than the new Unity FW features. @rpasichnyk
I submitted it 2 days ago… If you can’t wait, here’s apk https://www.icloud.com/iclouddrive/0E8988Mgk73monDlESS5WaEQg#40281-arm64-v8a
5 Likes
Ah I see thank you for the link!
1 Like
metr pro stuck ar “reading version 1” in the expert tab.
After a while “communication FAILED”
Live data works like it should.
log_2020-04-29.txt (38.1 KB)
1 Like
follow-up.
Records are still not syncing.
Now it goes to 8/39. Before it was 7/38.
+ while uploading one record a brief error appeared but i wasn’t able to read it fully.
I assume it was something from here?
edit : can’t be, the time was different. Its was around 17:45-18:10 i believe
i rather think this?
↓↓ latest log :
log_2020-04-29.txt (138.9 KB)
Did you try it with good internet connection? Can you zip your 0/Android/data/at.metr.app and send to me?