That’s what I’ve been told too.
But if it looks like shit, smells like shit my guess is that it must be shit 
9 Likes
$100 if you can find the source
8 Likes
Unfortunately I need maytech because I will be using this on a Kaly Helical drive 
I could go for the 6374 I only care about the KV and the compatibility with my Kaly drives.
Running the lacroix branded version of this motor on my 18s setup at the moment.
1 Like
What KV?
1 Like
190KV only 
140kV 6396. that’s what were discussing here right?
5 Likes
I dont care about the size between 6396 or 6374. I’ll take whichever is cheaper really.
1 Like
I just ordered a pair of their older 6384.
Newer 6384 motors are battlehardened but only come in 8mm variant.
Older ones are supposedly not battlehardened but can be either 8mm or 10mm shafts though I’ll be opening mine up today to double check if they’ve done anything recently
3 Likes
190kv gets me a top speed of 60+mph
4 Likes
Your board will get to 60mph but how fast are YOU willing to go? 
7 Likes
I don’t want to go over 40mph! That’s why I want a low KV motor. More power at the speeds I will actually be going.
3 Likes
LoL 
That’s what she said.
1 Like
Now. That’s some weird shit homie 
4 Likes
Seems to be some mixed feelings about Maytech here so I went ahead and bought what I wanted. I will report back on how they run at 16s and maybe help some of you decide.
I ended up buying this:
4 Likes
Hey man how are the maytechs holding up on 16s?
Is overheating a problem?
1 Like