Maxkgo ESK8 Sport LED Strip Controller - - - SKP Review

[b264]

Great review!

@Skyart

The part that would take longest is affixing your LEDs to your board, but this is not a reflection of the LED Kits function so I [won’t expand] on that.

I expanded on that a bit over here.

Tailbone Brakelight [SRO]

I decided to make a top notch tailbone brakelight so I am more visible from behind. First I got a Maxkgo ESK8 Sport LED Strip Controller for Electric Skateboard, the 12V S1X version I got some WS2815 LEDs that were spaced at 144/m for 12V operation without sheathing or silicone. [61p9hztOwAL.AC_SL1100] I found some scrap pegboard and two bolts that fit the holes: Then, I got out the DIY: [20211231_001415] [20211231_001957_HDR] I burned in the LEDs for a week and did discover a dead pi…

I also noticed the controller gets warm even with no LED strip connected.