MakerX DV6 Users Thread

[janpom]

@Takachi14

My xeniths are my pride and joys

I wish I could say the same about mine.

Public chat - talk about everything with everyone

I wonder if anyone had their ESC blow up as a result of the sensor cable getting pulled out while running. I had a weird accident last week. I changed my drive; installed the long xtla mounts, which put my motors further away from the ESC and there was almost no slack in the sensor cables. Then while testing the setup, as I turned, that put one of the motors even further from the ESC and the sensor cable got disconnected; also the solder joint on the 5V wire broke. The VESC shut down and I was…