12 Likes
Yes yes yes. Awesome work dude! Care to share the file?
1 Like
can you edit in dimensions?
yes of course, it is going to be fixed with high strength zip ties and double sided tape
If anyone has ideas for revisions let me know, Shaman is on vacation rn, Iāll see what he thinks
2 Likes
What is the price for that Little FOCer and what comes with it?
Iām about finished with my build and ready to use it.
1 Like
It says $150 here but it doesnāt look like you can buy it right now
@shaman whatās the status of the little focer currently?
4 Likes
Still waiting on production samples. Itās taking longer than expected. I have to verify quality of these samples before going to bigger batches
The price will be most likely somewhere between $225 and $250. This is due to the chip shortage and increase in cost of chips are that still sourcable. Thankfully there is a performance boost with the v3 hardware that helps get you more out of what you pay.
9 Likes
Can I have the files to make one myself?
Alright. Iām looking to get one to put into a 15s onewheel eventually, so is this the best place to keep track of stock?
2 Likes
For now but another source will pop up too. This other source will be more for state side orders. Iāll let yaāll know once itās stocked
5 Likes
Iām finally back to tinkering with my scooter, since school is done kicking my ass. For now at least. Hoping for EU shipping 
Definitely picking up the new turbo version once itās available.
2 Likes
Ups, serious increaseā¦ thought it were under $200, thinking that $50 or even less per unit could cover all the shortage/extra chip cost. Bad assumption
1 Like
I mean, the turbo version has 2x the current and power capability. I might be a little out of touch, but the current situation doesnāt seem very favourable. Everything is getting more expensive.
2 Likes
Yeah i wouldnāt have increased the price unless I had to. But I intend to try and make a living off of this and the other products Iām cranking out. The STM32 alone quadrupled in price if that helps give an idea of the situation. Also the intent is still to deliver a product inside a case/heatsink. So a step up from the basic aluminum I was attaching to the mosfets
9 Likes
huh never uploaded this becauseā¦ I have no idea
Little FOCer with stock heatsink.STEP (4.2 MB)
Little FOCer no heatsink and caps foldedā¦STEP (1.5 MB)
We knowā¦
2 Likes
this message isnāt for you. its for stupid people
7 Likes
Iām in sweden, is international shipping going to be available going forward on the next batch? 
Going to build a diy onewheel and i heard that a big guy like me should have some serious vesc muscles in my machine (such as your board)
1 Like
Sure thing mate, it will be available in EU.
2 Likes