Led Lights ideas?

[Agressivstreetlamp]

Shredlights to see ahead

Arduino strips for looks

[J0ker]

TelTail Lights (TTL) - Interactive eSkate Lighting System

COPIED FROM ELECTRIC-SKATEBOARD.BUILDERS Hey guys, For a few years now, I have been working on an interactive lighting system for diy electric longboards. It all started when I was in college and decided to add head, tail, and RGB side lights to my longboard. I wanted lights that would turn off when I picked the board up and turn on when I dropped it back down, so I created a controller that would take IMU measurements and turn them on and off based on the board’s orientation. Shortly after f…

[Venom121212]

Can confirm, @Ricco makes a great module

[jonisingt35r]

was thinking of flashing red led on the rear like in f1

[Venom121212]

The TTL had a rear light and front light implementation (horn too). It ties in to your uart and you can program it to flash, brighten, etc when it senses the remote braking.

I also use an xlite 100 which is battery powered and has an accelerometer inside so when I brake it turns on automatically. It’s not 100% accurate but does the job and has standard strobe, fade, etc modes.

[jonisingt35r]

that looks perfect hope it isnt too much

[mynamesmatt]

How to: Remote Controlled Lights

In this episode of tips and tricks with Matt, we’ll be learning how to have lights on your esk8, and be able to control said lights from your remote (in this case a gt2b). I’ve been struggling to find a definite guide to this so here goes nothing Step 1 - Your Shopping list: For this you’ll need a few things from ebay or Amazon, along with a few things you can source from most electronic stores. A 3ch remote with accessory switch or gt2b (modded is obviously preferable, however not necessar…

[jonisingt35r]

thanks

[bazis]

3d printed spacer for dickyho mount, esp8266 connected to flipsky reciever uart.

2020-01-04 14-44-45.MP4

[jonisingt35r]

Hi could you please send me the file getting a printer soon thank you

[jonisingt35r]

Can’t see anything?

[bazis]

All files here

This Leds

[jonisingt35r]

hello can you please post that vid again thanks

[bazis]

Now you can download it and watch.

[Kalitapaws]

Wondering if @Ricco ‘s module would be compatible with my led stuff.

[Venom121212]

@Kalitapaws

my led stuff

Tell me more!

[Kalitapaws]

Just have some leds under my board atm, but I’ve made it so it’s modular and I can add whatever to it if I choose. Though wondering if I can just attach Ricco’s module to it?

[Ricco]

The TTL contol module can control 12v analog RGB strips or 5v APA102 based addressable strips. It looks like your strips are analog. If they are 12v, they would be able be attached to the module no problem.

[Kalitapaws]

Oh sweet.

[bellay]

How to install a light on my esk8 and control it via the remote control, and change the brightness according to the speed and brake of the esk8. What do you think?