ICE CRUSHER | 16ply HOLYPRO | 4W chain drive MTB | 4x 6374 170kV APS | quad ESCAPE | Steering damper

[Andy87]

After I got all the replacement bells I started to battle harden all motors I had. A guide about battle harden motors can be found here:

The light white - an eMTB jump story

And as promissed here a small “how to battle harden outrunner” Yes, I had a lot of motors with lose magnets, which most time result in broken magnets as I just realized it when it was too late. I´m very tired from this picture: [1] So I was looking for a way to make my motors more reliable and came accross the “battel hareden” thing. But what is battle harden? Battle harden means to fill all gaps in the motor with epoxy. A really well made motor should already come like this (some maytech …

The winter is gone meanwhile. Time for a spring picture

I´m actually working on a 12S7P pack out of VTC5A cells. This will be a modular 2x 6S7P pack which can be easily swapped between boards.

Work in progress…