The vesc is all setup but the remote is not working. When I spin the wheel on the board it shows on the remote the speed but the throttle does do anything.
the joy of the vx2. search “vx2” on this forum, you’ll find your answer
Thanks
oh man, the labyrinth u just sent him down
When you find it, you should link it in here to help out other people reading this later.
This worked for me
My but at full throttle it makes a load screeching noice also the brake makes it go backwards
Set it to “Current Hyst Reverse” to get the best of all worlds, double tab brake to reverse.
Thanks I’ll do that.
When I brake to hard my board makes a noice that kinda sound like the belt is skipping, but I dont think it is the belt.
Kinda a tough ask, I assume it doesn’t happen unloaded, but, video/audio?
When I finish the board I’ll try to get one.
It is likely to be the belt skipping. Is it perfectly aligned?
I get the same thing and I’m on gear drive. I think it’s just gravity+momentum overcoming the magnetism in the motors.
On my old board, when the motor was going bad it would get worse, so I think your right.
This shouldnt happen. Something is aloof
My brakes feel like they “skip” a bit. Happens on thane and pneumies but on larger diameter wheels the “skips” seem… “bigger” I guess. I do maintenance on my gear drives like 4x per year so that might have something to do with it. Running straight cut steel gears.
I am almost done with my esk8 all I am waiting on a xt90 so I can finish my loopkey, and I’ll be able to close up my board. Thank you everyone for all the help along the way.
Hopefully thats a xt90S for the loop key.
I have an xt90s for the loopkey, I need another xt90 to connect the loopkey to the battery/vesc.