I don’t know enough about your build to offer a recommendation, but I can tell you I always target the green or between the green and yellow when I build.
Two 12AWG is good for 85A continuous and 175A peak
Three 14AWG is good for 100A continuous and 200A peak
The 14AWG is also easier to work with and takes up less space.
2 metes 30 x .15 nickel $10
2 meters each of 14 awg wire red and black $2
2 meters of each 12awg, and 18awg $???
1 holder and 2 fuses $6
Daly bms $20
this is a list of things that I am buying for my battery any comments or suggestions?
Yeah it’s going to make this a heck of a lot more difficult, and you don’t want to get anything hotter than you need to get it, or for longer than it needs to be hot for, and using lead-free solder is a good way to do exactly those two things. All while producing an inferior result.
I cant right now, I’ll try in the morning.
the vesc already had wires I just added the xt90, my main question is that going to be an issue because of resistance or something?