Are those still available ? Would be interested
1 Like
Update on what’s left, what’s sold, etc. (still updating this as i go down the list, just haven’t had a lot of time to check replies)
BN M1AT’s are gone, i just can’t find the damn things. I’ll update if i find them somewhere
BN M1’s are pending.
BN Adjustable baseplates are damaged, likely not going to sell as i don’t think they’re safe to use anymore.
BN 270’s are sold.
Generic motors and matrix 2 mounts are sold.
Spyder XT’s are sold.
MBS bindings are sold.
Evolve 7" wheels and pulleys are sold.
Qing da 200x75 are sold.
Zeus Pro 13S4P P42A battery is confirmed working, no faults.
Reacher 7490 motors price dropped to 450 for both, still wanting to trade for 2x reacher 6485 + a bit of cash though.
2 Likes
What is wrong with them? I have plenty of sets so I would not ride them but might want to cut up for other stuff.
The hole on the baseplate mounting side is damaged, elongated so now theres a lot of play in the assembly. The bit that holds the kingpin is still fine.
2 Likes
oh I have been thinking about drilling more holes to use 2-3 bolts to hold the two baseplate parts together anyways. Use a 3d printed drill guide to get the holes in the right spot to line up with desired angle/holes in sliding part.
4 Likes
If you want em, theyre yours for shipping and like 20 bucks lol. Just gimme a bit to pull the front one off of my board.
1 Like
Gonna update with what’s left, and price dropping a fair few items. If someone wants to buy the Boundmotor Octopus build as a complete, let me know.
Boundmotor Octopus Deck, Enclosure. Deck is in good condition, enclosure has some minor scratches on the bottom. Front end cap is modified to fit a power button and charge port cleanly integrated. Has a bioboards heatsink for a spintend ubox currently installed. I’ll even throw in the nicer enclosure mounting hardware I used. $300.
BN270s, 10mm axles. One of them is kinda beat up as it was sanded down to fit some motors on gear drives without rubbing. $70.
Defiant Board Society BN280s w/Xcell 12mm Axle sleeves, axle nuts. Good condition, and a great way to run the nicer wide pneumatic wheel hubs on an RKP setup. $130.
BN220s, 8mm axles. $70.
Trampa fifties hangers. $60.
Trampa fifties baseplates. $50.
Lacroix hypertruck axles. $20.
Lacroix Hyperrims + 72T pulleys. $230.
A set of tires. $40.
A single Lacroix 6389 of unknown KV. $50.
Boardnamics M1 helical gear drives w/6355 motors. $200. Functional, but pretty beat up.
Stormcore VESC heatsink. $30.
Trampa bindings. $25
Meepo 10S2P battery, charger. $80.
Eovan GTS Carbon Pro Deck (heavy wear). $80.
Assorted motor pulleys. $5/pair.
Boa 100 wheels. $80.
TB110 wheels. $80.
Ownboard Zeus Pro battery. P42a, 13S4P, redone connector to XT90-S. Fully functional. $400.
Spintend Ubox 75V. Has had the thermal pads upgraded. Fully functional, comes with bluetooth module. $300
SKP Reacher 7490 179kv motors. Excellent functional condition, a few cosmetic bumps from them being so beefy and hitting some debris. Will include a handful of 20mm wide pulleys for them in too, as theyre annoying to source. $450. Alternatively, id trade them for some reacher 6485 or similar with a bit of cash on the difference.
1 Like
what kind? may be interested
1 Like
I think off the top of my head, i have some evolve 7 inch, generic 8 inch, maybe some 6 inch tires?
1 Like
lemme see pic of the 8 inch?
2 Likes
Any chance you selling the newbeee footstops?
1 Like
Probably not lol, i like them too much
2 Likes
Another update on whats left as well as some price drops.
Boundmotor Octopus Deck, Enclosure. Deck is in good condition, enclosure has some minor scratches on the bottom. Front end cap is modified to fit a power button and charge port cleanly integrated. Has a bioboards heatsink for a spintend ubox currently installed. I’ll even throw in the nicer enclosure mounting hardware I used. $280.
BN270s, 10mm axles. One of them is kinda beat up as it was sanded down to fit some motors on gear drives without rubbing. $70.
BN220s, 8mm axles. $60.
Trampa fifties hangers. $50.
Trampa fifties baseplates. $40.
Four Lacroix hypertruck axles. $20.
Lacroix Hyperrims + 72T pulleys. $220.
A set of tires. $40.
A single Lacroix 6389 of unknown KV. $50.
Boardnamics M1 helical gear drives w/6355 motors. $200. Functional, but pretty beat up.
Stormcore VESC heatsink. $30.
Trampa bindings. $25
Meepo 10S2P battery, charger. $80.
Eovan GTS Carbon Pro Deck (heavy wear). $80.
Assorted motor pulleys. $5/pair.
Boa 100 wheels. $80.
TB110 wheels. $80.
Ownboard Zeus Pro battery. P42a, 13S4P, redone connector to XT90-S. Fully functional. $380.
SKP Reacher 7490 179kv motors. Excellent functional condition, a few cosmetic bumps from them being so beefy and hitting some debris. Will include a handful of 20mm wide pulleys for them in too, as theyre annoying to source. $420. Alternatively, id trade them for some reacher 6485 or similar with a bit of cash on the difference
This is in your update. You still have these?
1 Like
Yep, still got them.
3 Likes
You have a set of 4 tires that would fit on this? looks like a pretty standard “off-road” clone.
What KV are these motors and are they “battle-hardened”?
1 Like
190kv, no clue about battle hardening.
2 Likes
I should yep, although it’s probably not all that cost effective to buy a set off of me after shipping costs
1 Like