HI200 75V 300A ESC Based on VESC 75300

[yongitech]

HI200

Voltage: 75V maximum (recommended within 16S)

Current: 200A continuous, maximum 300A

Features:
1, Based on the design of vesc75300 hardware principle
2, Using 18 mosfet IRF7759L
3, Independent gate drive
4, Independent power supply
5, Independent current sampling
6, Active filter circuit makes current sampling more accurate
7, rich onboard interface
8,independent two-way adc
9,support VESC TOOL official 75300 firmware
10,Four-layer board design of size 100x61mm, the circuit is reasonable and stable
Size: 122 x 73 x 30mm （Including heat sink）

[yongitech]

Size: 112 x 73 x 30mm （Including heat sink）

[ZachTetra]

Do all 3 inputs need to be connected or is there a sufficient via for distributing power from one input?

Use USB-c!!

Looks cool though

And price?

[Fosterqc]

https://forum.esk8.news/c/vendor-corner

@yongitech

[yongitech]

ok.

[yongitech]

If someone needs, can send me email:
[Link redacted out of security reasons]

[b264]

Why 75V 300A instead of 75A 300V which could be far more useful?

[Andy87]

@b264

300V

You really like electroshocks

[yongitech]

A high voltage of 300V is harder to design.

[Trampa]

https://forum.esk8.news/t/dualesc6-directfet-only-for-electric-skateboard/39338/67?u=trampa

[yongitech]

hi,Thank you for your great support.

[Link redacted out of security reasons]

[yongitech]

[Link redacted out of security reasons]

[yongitech]

HI100 75V 100A ESC Based on VESC 75300

[yongitech]

[Link redacted out of security reasons]

[yongitech]

[Link redacted out of security reasons]

[b264]

What are the dimensions of the YongESC HI100? I don’t see that listed.

[yongitech]

hi,

China VESC !

[whaddys]

cool video! That’s one chonky heatsink!

[yongitech]

This is just an introductory demo video.

[yongitech]

free shipping for DHL.