Oh nice. I like that.
I was just looking at something similar.
I’ll add it to the list. Thanks man
4 Likes
For the record, Sean is freakishly good at bed leveling.
Somehow his prints are looking better than mine and I’m losing my mind over it.
7 Likes
I want a 3d printer now curses!
Maybe for my birthday.
3 Likes
After a little searching, I found out the ender 3 is still on sale through their site!!! $175 with free shipping
Not as good as $144 but it beats full price
4 Likes
You’ve done well @SeanHacker! I’ve finally gotten my leveling down pretty well.
The glass bed helps a lot and then I use a feeler gauge.
The air cooler, I put the bigger version on and it’s been helping a lot, I may go down to the bullseye now that I’m not going to use the BL touch
4 Likes
For EU guys!
Ender 3 Pro, shipped from Spain for 182.59$
Already ordered twice, thinking about one more order 
Link:
US $162.15 34%OFF | Creality 3D New Ender 3 / Ender-3 PRO DIY 3D Printer drucker impresora 3D Self-assemble 220 * 220 * 250mm with Resume Printing
https://a.aliexpress.com/CNJWUxxa
4 Likes
FWIW I bought a pair of these printers at $225 + a 3rd at $144. If I needed another I’d gladly pay $225.
At $225, it’s still an incredible value, so $175 is a great deal. The $144 price was likely very limited quantities sold at barely above fob price, I doubt we will see that again before next holiday.
2 Likes
So glad I grabbed one.
I’ve pretty much only used the 3D printer to print things for the 3D printer lol
But still.
I’m trying to get used to it doing a bunch of small stuff before I do any of the big 50-hour Prints I want to do.
Plus I’m going to deal with the noise before I leave this thing running for 3 days lol
Torn between
https://www.amazon.com/gp/aw/d/B07TJNX4FB/ref=ox_sc_saved_image_5?smid=A26BI19QRFB6PB&psc=1
And
I hope you printed it 100% infill. Even then with PLA it might break if you lift the board with a jerk. It’s optimized for PETG.
3 Likes
I’m printing it in PETG. That was just a test for one of my 1st prints. I’m going to print it again with 100% infill next round.
4 Likes
@Skunk this guy is the best and he has a different suggestion. Also this video is pretty recent.
1 Like
Looking at the pic again, this is the older versions that broke after months of use. I have a more updated version that’s been going strong for a year. Let me find the file.
@SeanHacker
rear_trolley_handle_stronger.STL (16.7 MB)
2 Likes
So I got a cr-10 recently and after trying to print with abs for the first couple of prints found out that it is not ideal for beginners changed back to pla and now nothing is coming out the hotend 
Gotta find a fix
What are you printing that will take 50 hours.
Where is your God now?
2 Likes
Dildo octopus
4 Likes
You use this personally? The kit with the rail upgrade cost as much as the printer. Is it worth it for just the aluminum bracket kit or do the rails really make that much difference from stock
Awesome. Thanks dude!
1 Like
youve gone balls deep now
wait shipping is free on this deal 
3 Likes