If you pair this deal with an EZABL you’d have a dope printer for under $200 that would put out some pretty good quality prints.
I believe it! I have considered getting another printer, but after printing the hub/pulleys that I’ve used on the budget board - I haven’t really touched it since… Honestly I should start printing my NESE cells and start dry fitting the DWII but I just cant be bothered atm 
5 Likes
At those prices, it’s so hard to resist, even when I don’t really need a 3d printer lol.
Would the hotend work out of the box for nylon/TPU? Anything else needed besides the glass bed?
2 Likes
I just did this… Thanks for the heads up dude. @DerelictRobot has been bugging me to get one for a while.
6 Likes
My wife got me one for Christmas. Then I cancelled the order lol.
Do want. Just… Not the time.
6 Likes
Fucking FINALLY Seanathon.
I’ll send you the model for the “Helmet Hook” asap.
Edit: found it
5 Likes
I want too get a 3d printer but gonna have to wait awhile. Hopefully the promos don’t get removed.
Would this be a good choice for a complete noob to 3D printing and is it pretty easy to set up and use? I’ve been wanting to get a 3D printer for a while and introduce my kids to this amazing technology, but I don’t want to be constantly fiddling with it to get decent prints. This seems like a great deal.
5 Likes
I’ve only touched a couple 3d printers in real life. So I hope so… 
2 Likes
For all those with Ender 3, I have to recommend the BLV MGN Ender pro mod. It was just released by a guy named Ben Levi who has created several full printer kits and released then open source. My printer is roughly based on his mgn prusa setup and it does great work
Here’s the newly released Ender 3 pro BLV mod
3 Likes
By far one of the best upgrades I did to my Ender 3 is the SKR Mini E3 control board. Loudest thing on it was the power supply fan after I installed it and it was smooth as butter. Over time mod though, it’s not a “need” per say. First on the agenda is glass bed, bed springs, and part cooling fan. Then I would say Capricorn tubing and new pnuematic push fittings. Maybe a BMG or clone extruder, E3D V6 hotend, etc. All about personal needs and where I was printing TPU, PETG, and Nylon with mine mostly I need some above average gear.
2 Likes
I’ve never even touched one, but down the rabbit hole we go. I just bought one too. Time to start scouring the forum and internet for info and tips. So excited and a little scared (mostly financially, lol).
Thanks and damn you @bwahl602 for this. 
4 Likes
I luckily will use @DerelictRobot as my trainer, teacher, lover on this one… It’s basically his fault anyways.
3 Likes
IDK much about 3D printers really, but I supported this KS last year.
Did the pledge with wood CNC module, 2500mW Laser, 0.15mm & 0.4mm FDM modules.
Can’t wait for it to get here, slated for delivery 2nd quarter next year (after adjusted timelines due to suppliers).
1 Like
I could probably do a walk through or livestream on 3D printing and setup if people wanted. I’ll have some time over the holidays
Here’s an old shot of the custom machine I built earlier this year
7 Likes
Yeah. Ugh.
You won’t catch me again Gypsy. I’m not going down this rabbithole (again). I’ve been stock for 3 years now, i can’t relapse.
2 Likes
I’m gifting this to my cousin. Im going to print a few upgrades for it before I give it to her on Xmas. Ill take some pictures while I have the machine
3 Likes
Thanks my dudes, I just not so subtly dropped the hint for my wife to buy this for me today for Xmas lol.
1 Like
Nice machine. heading down a similar path myself with a machine I am designing / building. Only difference is I am going with a dual x carriage setup. Are you running .9º steppers? Been a year in the making so far and has been delayed more because I just picked up a Folgertech FT5 kit last week for $100 and that is sucking up my time right now.
1 Like
Other than the loudness, did you notice any other differences? It has built in smoothers too I guess