D60/D100 compatibility will get me into a couple of these for sure.
5 Likes
Good to hear, the greater the material order I place the lower the price will be so I might even be able to lower the price a little, but will need a lot more reservations first though.
Anyhow here’s a little update:
Looks like the majority prefers blind holes for the mounting patterns in the middle of the heatsink so I added those to the back so they can easily be drilled through in case you want to use that specific pattern. The holes on the edges are tapped for M3 and M4, for mounting the heatsink to an enclosure and mounting the stormcore & Ubox.
1 Like
Shouldn’t the corner M4 holes be slightly closer to the edges? For aesthetics/symmetry + so that the bolt heads don’t interfere with the raised up cooling fins
3 Likes
The corner M4 holes are for Ubox mounting. the M3 holes are for enclosure mounting (80x80 mm pattern), this is the same as 3D servisas so the mounting pattern is cross compatible.
2 Likes
Did we ever get consensus on what the hole pattern is for these? @glyphiks at one point you said you’d measure them, but I can’t find your model
If they work for the D series, I’m interested in one.
1 Like
The DV6 pattern is 60 x 35 mm, but not sure about the other MakerX versions, will see if I can find something.
EDIT:
Looks like there arent really any mounting holes specifically for an external heatsink.
3 Likes
On the latest batch, apparently they added mounting holes. I know Al has some, and probably a few other members. I just emailed MakerX to ask.
4 Likes
Awesome, looking forward to see what the dimensions are.
1 Like
The first couple of batches of d series didn’t have holes. They all do now. Same as dv6
4 Likes
Thanks, so then most MakerX ecs’s will fit 
2 Likes
Idk if this is feasible, but the ability to mount 2x M100 MakerX ESCs to the heatsink would be golden.
2 Likes
Think I will keep this heatsink to the dual integrated esc’s. But can take a look anyway, what’s the mounting pattern?
1 Like
let me buy a couple (I fully intend to) and I’ll get right back to you on that
1 Like
1 Like
I wont include single esc options for this batch yet, maybe a future one. Gonna prepare for the batch start of next week.
5 Likes
Could you please share the dimensions of the larger inside area of the new design? I might want to order 1 more or 1 less depending on if it fits my boards 
2 Likes
You mean the finned part that protrudes outside of the enclosure?
No, the plate that sits on the inside of the enclosure
2 Likes
it’s 132 by 85 mm and the thickness of the part inside the enclosure is 4 mm
1 Like
Hmm, that would actually barely fit a 3rd board I’m working on, but unfortunately I just realized my D75 doesn’t have the extra holes for mounting a heat-sink to, so I think I’ll reduce my order to just a single heat-sink.
1 Like